SUPERFIRE A36 12W EDC Bright LED Flashlight 2000mAh Battery 780LM Torch Portable Camping Fishing Lantern
1) The A36 is use 18650/2000mAh battery, it can be replaced. The A36 is not zoomable, can not zoom in or zoom out.
2).When you first receive the flashlight, please open the tail cap and remove the white circular insulating sheet. If the battery has a transparent film, please also tear it off. Then, reassemble the flashlight, and it should work normally.
3). Then use a 5V/1A charger to charge, otherwise it may not use normally!
1. 100% From SUPERFIRE Factory
★★★One Year Warranty
★★★Quality control (QC) and product testing before shipment
★★★Bubble packaging before shipment
2. About this item
1). Exquisite appearance, fashionable and compact;
2). High-brightness lamp beads, high brightness, better lighting effect;
3). Contains waist clip, magnetic suction, and hand strap, making it easy to carry.
3. Parameter
* Model: A36
* Light source: LED
* Brightness (LM): 780LM
* Power (W): 12W
* Range(M): 160M
* Battery: 18650/2000mAh
* Battery life (H): about 3H
* Weight (G): 94G
* Protection level: IP44
* Size (mm): 128*28*26mm
4. Package Included
1). 1 * Flashlight
2). 1 * USB charging cable
6. Lamp &amp; Battery Maintenance Suggestion:
1). Please use a normal charger to charge.
2). Keep away from heat and fire sources, do not modify the battery.
3). Suggest store the battery in a dry environment away from children.
4). Do not install the battery upside down, or put it together with metal objects such as spoons.
5). Do not disassemble the product by yourself to avoid short circuit. Do not use in an environment above 45°C.
6). It is forbidden to directly irradiate people&#8217;s glasses, which may cause temporary blindness to avoid unnecessary injury.
7). The flashlight uses a high-power chip to emit light, and heat (within 45°C) is a normal phenomenon, so there is no need to worry.
8). The battery cannot be overcharged or over discharged during use, please operate in strict accordance with the instructions for use.
9). If the battery leaks, please wash the contaminated skin and cloth with water immediately. If the condition is severe, consult a doctor.
10). When the battery is exhausted, please charge it as soon as possible, the battery suggest be charged at least once a month when idle.
&nbsp;

SUPERFIRE A36 12W EDC Bright LED Flashlight 2000mAh Battery 780LM Torch Portable Camping Fishing Lantern

Computer Accessories Hub

SUPERFIRE L25 High Power Flashlight
Overview 
The L25 is suitable for outdoor use and comes with 7 SH-U03 light source, offering a 35W and 3700 lumens brightness. Its mini size and lightweight of 129g makes it ideal to be carried as a pocket flashlight or for everyday carry (EDC) use. With a Type-C charging port and an IP44 protection rating, it can be your trusted companion in outdoor activities.
Light Source: SH-U03 ×7
Brightness: 3700 Lumens
Power: 35w
Material: 6061-T6 Aviation Aluminum
Size: 118×41×33mm
Net Weight:129g
Power Source: 26650 Rechargeable Li-Ion Battery
Runtime: 3-5 Hours
Charge Time: 5 Hours
Distance: 150 Meters
Waterproof:IP44
Light Modes: Low-Medium-Strong-Strobe-SOS-Turbo

SUPERFIRE L25 High Power Flashlight

SUPERFIRE L20 Large Capacity Flashlight 
The SUPERFIRE L20 flashlight is equipped with a 600-meter long-range capability, which can easily illuminate the distance even in the dark night. At the same time, it has an ultra-high brightness of 5000 lumens and a high power of 60W, providing a strong light source for various extreme environments. The built-in 8800mAh large-capacity battery supports 5-8 hours of long-term battery life, meeting the needs of long-term use such as outdoor adventures and emergency rescue. The portable design and the flashlight come with a comfortable grip, which is convenient to hold and carry with you. Whether in the wild, on the construction site or in a family emergency, you can calmly deal with it. Choose SUPERFIRE L20 to add reliable light to your every exploration!
SUPERFIRE L20 High Lumnes Flashlight Specifications
Brightness 5000 Lumens
Power source 60w
Material Aluminum alloy
Size 161*112*84mm
Net weight 600g
Waterproof IP44
Runtime 3-5 H
&nbsp;
Charging time 5 H
Charging port Type-C
Distance 600m
Battery capacity 4*18650/2200mah
Modes 5modes(low light-middle light-strong light-strobe-sos/double click to turbo)

SUPERFIRE L20 Large Capacity Flashlight

Godox XTR-16 Wireless Power-Control Flash Trigger Receiver
Overview
The Godox XTR16 Wireless Power-Control Flash Trigger Receiver is a companion to the XT16 Wireless Power-Control System. It is mounted on to the Wireless Control Port of select flashes and enables remote power control over the flash. With a reliable 2.4 GHz frequency, this trigger receiver features a working range of up to 100m (328&#8242;). With this reciever, users have a range of 16 channels to choose from and can sync at speeds of up to 1/250s. Additionally, it does not require any batteries because it receives power via the flash connection. It is compatible with the following Godox flashes: Wistro, Quicker, Quicker D, QT, QS, Gemini GT, Gemini GS, DE, and DP series.
&nbsp;
Included in the package
Godox XTR16 Wireless Power-Control Flash Trigger Receiver

Godox XTR-16 Wireless Power-Control Flash Trigger Receiver

Godox XT32C Wireless Power-Control Flash Trigger for Canon Cameras
Product Highlights
<ul>
<li>Works with X Wireless Radio System</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 100m (328&#8242;)</li>
<li>32 Channels; 16 Groups</li>
<li>LCD Panel</li>
<li>Remote Power Control for select flashes</li>
<li>High-Speed Sync Support</li>
<li>PC Sync Terminal</li>
<li>Micro-USB Port for Firmware Updates</li>
<li>Runs on Two AA Batteries (NOT INCLUDED)</li>
</ul>
Overview
The XT32C Wireless Power-Control Flash Trigger from Godox is part of the 2.4GHz X Wireless Radio System that helps photographers create and take control over their wireless flash setup. It can work up to an impressive range of 100m (328&#8242;) and can offer remote control over compatible flashes and receivers, such as the XTR-16. In addition, it has access to 32 channels and 16 groups for elaborate configurations. Designed for Canon cameras, this trigger will support functions such as high-speed sync, modeling lamp control, AF assist, and more. Also, it has an LCD panel for easy viewing and changing of settings.For even more functionality, it has a PC sync terminal which can be set as either an input or an output and it has a micro-USB port for firmware updates. Additionally, it runs on two AA batteries that are NOT included.
&nbsp;
In the box
<ul>
<li>1 x Godox XT32C Trigger for Canon Cameras</li>
<li>1 x User&#8217;s Manual</li>
</ul>

Godox XT32C Wireless Power-Control Flash Trigger for Canon Cameras

Godox XT-16 Wireless Power-Control Flash Trigger 2.4G (Transmitter)
Product Highlights
<ul>
<li>Wireless Power Control Function</li>
<li>Mounts to Camera&#8217;s Hot Shoe</li>
<li>Frequency: 2.4 GHz</li>
<li>Working Range: 100m/328&#8242;</li>
</ul>
Overview
The XT-16 Wireless Power-Control Flash Trigger Transmitter from Godox is a shoe-mounted 2.4G remote triggering device for up to eight stops of wireless power control for select flashes equipped with the XTR-16 receiver. Featuring a reliable 2.4 GHz radio system, this transmitter is also to sync with XTR-16 the receiver up to a range of 100m and can trigger up to a maximum of 16 channels. Users can sync at speeds up to 1/250 second and there are multiple power control settings for working with speedlights or studio flashes. Additionally, it runs on two AA batteries (NOT INCLUDED).
&nbsp;
Compatible Flashes
Godox: Wistro, Quicker, Quicker D, QT, QS, Gemini GT, Gemini GS, DE, DP and MS series
In the Box
1 x Godox XT-16 Wireless Power-Control Flash Trigger 2.4G (Transmitter)

Godox XT-16 Wireless Power-Control Flash Trigger 2.4G (Transmitter)

Godox XProS TTL Wireless Flash Trigger for Sony Cameras
Product Highlights
<ul>
<li>Compatible with Sony ADI / P-TTL</li>
<li>Works with X Wireless Radio System</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 100m (328&#8242;)</li>
<li>32 Channels; 16 Groups; Wireless ID</li>
<li>Backlit LCD Panel</li>
<li>Remote Power Control for select flashes</li>
<li>High-Speed, 1st &amp; 2nd Curtain Sync</li>
<li>Runs on Two AA Batteries (NOT INCLUDED)</li>
</ul>
Overview
The XProS TTL Wireless Flash Trigger is part of the 2.4 GHz Godox X wireless radio systems of flash triggers. It is used to effectively and reliably trigger flashes from up to less than 100m away and it can provide it&#8217;s user with the benefit of remote power control when it is used with compatible flashes and receivers. It is compatible with Sony&#8217;s ADI / P-TTL system , including support for high-speed sync up to 1/8000 second, and advanced control options along with settings for working with system-specific features. With this trigger, users can set up 16 groups on one of 32 channels and then access 99 wireless ID settings for limiting interference from other nearby systems.
&nbsp;
It has the basic manual control mode, the TTL control mode, the stroboscopic flash mode as well as the second-curtain sync mode. Users can adjust flash exposure compensation from -3 to +3 EV as well as wireless control of the modeling light, zoom setting, and more. To use the XProS with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the device runs on two AA batteries (NOT included).
&nbsp;
In the box
1 x Godox XProS TTL Wireless Flash Trigger for Sony Cameras
User&#8217;s Manual

Godox XProS TTL Wireless Flash Trigger for Sony Cameras

Godox XProN TTL Wireless Flash Trigger for Nikon Cameras
Product Highlights
<ul>
<li>Compatible with Nikon i-TTL</li>
<li>Works with X Wireless Radio System</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 100m (328&#8242;)</li>
<li>32 Channels; 16 Groups; Wireless ID</li>
<li>Backlit LCD Panel</li>
<li>Remote Power Control for select flashes</li>
<li>High-Speed, 1st &amp; 2nd Curtain Sync</li>
<li>Runs on Two AA Batteries (NOT INCLUDED)</li>
</ul>
Overview
The XProN TTL Wireless Flash Trigger is part of the 2.4 GHz Godox X wireless radio systems of flash triggers. It is used to effectively and reliably trigger flashes from up to less than 100m away and it can provide it&#8217;s user with the benefit of remote power control when it is used with compatible flashes and receivers. It is compatible with Nikon&#8217;s i-TTL system , including support for high-speed sync up to 1/8000 second, and advanced control options along with settings for working with system-specific features. With this trigger, users can set up 16 groups on one of 32 channels and then access 99 wireless ID settings for limiting interference from other nearby systems.
&nbsp;
It has the basic manual control mode, the TTL control mode, the stroboscopic flash mode as well as the second-curtain sync mode. Users can adjust flash exposure compensation from -3 to +3 EV as well as wireless control of the modeling light, zoom setting, and more. To use the XProN with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the device runs on two AA batteries (NOT included).
&nbsp;
In the box
1 x Godox XProN TTL Wireless Flash Trigger for Nikon Cameras
User&#8217;s Manual

Godox XProN TTL Wireless Flash Trigger for Nikon Cameras

Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras
Product Highlights
<ul>
<li>Compatible with Fujifilm TTL</li>
<li>Works with X Wireless Radio System</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 100m (328&#8242;)</li>
<li>32 Channels; 16 Groups; Wireless ID</li>
<li>Backlit LCD Panel</li>
<li>Remote Power Control for select flashes</li>
<li>High-Speed, 1st &amp; 2nd Curtain Sync</li>
<li>Runs on two AA Batteries (NOT INCLUDED)</li>
</ul>
Overview
The XProF TTL Wireless Flash Trigger Transmitter is part of the 2.4 GHz Godox X wireless radio systems of flash triggers. It is used to effectively and reliably trigger flashes from up to less than 100m away and it can provide it&#8217;s user with the benefit of remote power control when it is used with compatible flashes and receivers. It is compatible with Fujifilm&#8217;s TTL system, including support for high-speed sync up to 1/8000 second, and advanced control options along with settings for working with system-specific features. With this trigger, users can set up 16 groups on one of 32 channels and then access 99 wireless ID settings for limiting interference from other nearby systems.
&nbsp;
It has the basic manual control mode, the TTL control mode, the stroboscopic flash mode as well as the second-curtain sync mode. Users can adjust flash exposure compensation from -3 to +3 EV as well as wireless control of the modeling light, zoom setting, and more. To use the XProF with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the device runs on two AA batteries (NOT included).
&nbsp;
In the box
<ul>
<li>1 x Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras</li>
<li>User&#8217;s Manual</li>
</ul>

Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras

Godox XProC TTL Wireless Flash Trigger for Canon Cameras
Product Highlights
<ul>
<li>Compatible with Canon E-TTL / E-TTL II</li>
<li>Works with X Wireless Radio System</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 100m (328&#8242;)</li>
<li>32 Channels; 16 Groups; Wireless ID</li>
<li>Backlit LCD Panel</li>
<li>Remote Power Control for select flashes</li>
<li>High-Speed, 1st &amp; 2nd Curtain Sync</li>
<li>Runs on Two AA Batteries (NOT INCLUDED)</li>
</ul>
Overview
The XProC TTL Wireless Flash Trigger is part of the 2.4 GHz Godox X wireless radio systems of flash triggers. It is used to effectively and reliably trigger flashes from up to less than 100m away and it can provide it&#8217;s user with the benefit of remote power control when it is used with compatible flashes and receivers. It is compatible with Canon&#8217;s E-TTL / E-TTL II system , including support for high-speed sync up to 1/8000 second, and advanced control options along with settings for working with system-specific features. With this trigger, users can set up 16 groups on one of 32 channels and then access 99 wireless ID settings for limiting interference from other nearby systems.
&nbsp;
It has the basic manual control mode, the TTL control mode, the stroboscopic flash mode as well as the second-curtain sync mode. Users can adjust flash exposure compensation from -3 to +3 EV as well as wireless control of the modeling light, zoom setting, and more. To use the XProC with other camera systems there is a 2.5mm sync port that supports triggering via a wired connection. Also, a USB Type-C port is present for firmware updates and the device runs on two AA batteries (NOT included).
&nbsp;
In the box
1 x Godox XProC TTL Wireless Flash Trigger for Canon Cameras
User&#8217;s Manual

Godox XProC TTL Wireless Flash Trigger for Canon Cameras

Godox XPro II TTL Wireless Flash Trigger for Sony Cameras
Product Highlights
<ul>
<li>Works with Godox&#8217;s X wireless radio system</li>
<li>Compatible with Sony TTL</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 100m</li>
<li>32 Channels; 16 Groups; Wireless ID</li>
<li>Controls select Godox flashes</li>
<li>Has a backlit LCD panel</li>
<li>High-Speed sync, 1st &amp; 2nd Curtain Sync</li>
<li>2.5mm Sync Port; USB Type-C Port</li>
<li>Bluetooth Connectivity</li>
</ul>
Godox XPro II Wireless Trigger Overview
Godox XPro II TTL Wireless Flash Trigger is a transmitter compatible with the 2.4 GHz X wireless radio system found in most Godox flashes allows for control up to 100m away. This upgraded model is compatible with the Sony TTL system, meaning it supports high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with camera system-specific features.
&nbsp;
You can control up to 16 groups on any one of the 32 available channels. It also has 99 wireless IDs for imiting interference from other nearby similar systems.
&nbsp;
The upgrade feature on this transmitter is the ability to connect it to a smartphone via Bluetooth for remote operation. to achieve this, download and install the GodoxPhoto app onto a compatible Android or iPhone smartphone or tablet. With the app you can adjust the flash mode, power output, modeling light, high speed sync, and more. Other settings available with this trigger include manual and TTL control modes, second-curtain sync and stroboscopic flash. Flash exposure compensation can be adjusted from -3 to 3 EV. Finally, you can adjust zoom settings as well as wirelessly control the modeling light. A 2.5mm sync port facilitates for triggering via a wired connection. The USB Type-C port is for firmware updates. Runs on two AA batteries (Not Provided).
&nbsp;
In the Package
<ul>
<li>Godox XPro II TTL Wireless Flash Trigger for Sony</li>
<li>Manual</li>
</ul>

Godox XPro II TTL Wireless Flash Trigger for Sony Cameras

Godox XPro II TTL Wireless Flash Trigger for Nikon Cameras
Product Highlights
<ul>
<li>Works with Godox&#8217;s X wireless radio system</li>
<li>Compatible with Nikon TTL</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 100m</li>
<li>32 Channels; 16 Groups; Wireless ID</li>
<li>Controls select Godox flashes</li>
<li>Has a backlit LCD panel</li>
<li>High-Speed sync, 1st &amp; 2nd Curtain Sync</li>
<li>2.5mm Sync Port; USB Type-C Port</li>
<li>Bluetooth Connectivity</li>
</ul>
Godox XPro II Wireless Trigger Overview
Godox XPro II TTL Wireless Flash Trigger is a transmitter compatible with the 2.4 GHz X wireless radio system found in most Godox flashes allows for control up to 100m away. This upgraded model is compatible with the Nikon TTL system, meaning it supports high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with camera system-specific features.
&nbsp;
You can control up to 16 groups on any one of the 32 available channels. It also has 99 wireless IDs for imiting interference from other nearby similar systems.
&nbsp;
The upgrade feature on this transmitter is the ability to connect it to a smartphone via Bluetooth for remote operation. to achieve this, download and install the GodoxPhoto app onto a compatible Android or iPhone smartphone or tablet. With the app you can adjust the flash mode, power output, modeling light, high speed sync, and more. Other settings available with this trigger include manual and TTL control modes, second-curtain sync and stroboscopic flash. Flash exposure compensation can be adjusted from -3 to 3 EV. Finally, you can adjust zoom settings as well as wirelessly control the modeling light. A 2.5mm sync port facilitates for triggering via a wired connection. The USB Type-C port is for firmware updates. Runs on two AA batteries (Not Provided).
&nbsp;
In the Package
<ul>
<li>Godox XPro II TTL Wireless Flash Trigger for Nikon</li>
<li>Manual</li>
</ul>

Godox XPro II TTL Wireless Flash Trigger for Nikon Cameras

Godox XPro II TTL Wireless Flash Trigger for Canon Cameras
Product Highlights
<ul>
<li>Works with Godox&#8217;s X wireless radio system</li>
<li>Compatible with Canon TTL</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 100m</li>
<li>32 Channels; 16 Groups; Wireless ID</li>
<li>Controls select Godox flashes</li>
<li>Has a backlit LCD panel</li>
<li>High-Speed sync, 1st &amp; 2nd Curtain Sync</li>
<li>2.5mm Sync Port; USB Type-C Port</li>
<li>Bluetooth Connectivity</li>
</ul>
Godox XPro II Wireless Trigger Overview
Godox XPro II TTL Wireless Flash Trigger is a transmitter compatible with the 2.4 GHz X wireless radio system found in most Godox flashes allows for control up to 100m away. This upgraded model is compatible with the Canon TTL system, meaning it supports high-speed sync up to 1/8000 second, and offers advanced control capabilities for working with camera system-specific features.
&nbsp;
You can control up to 16 groups on any one of the 32 available channels. It also has 99 wireless IDs for imiting interference from other nearby similar systems.
&nbsp;
The upgrade feature on this transmitter is the ability to connect it to a smartphone via Bluetooth for remote operation. to achieve this, download and install the GodoxPhoto app onto a compatible Android or iPhone smartphone or tablet. With the app you can adjust the flash mode, power output, modeling light, high speed sync, and more. Other settings available with this trigger include manual and TTL control modes, second-curtain sync and stroboscopic flash. Flash exposure compensation can be adjusted from -3 to 3 EV. Finally, you can adjust zoom settings as well as wirelessly control the modeling light. A 2.5mm sync port facilitates for triggering via a wired connection. The USB Type-C port is for firmware updates. Runs on two AA batteries (Not Provided).
&nbsp;
In the Package
<ul>
<li>Godox XPro II TTL Wireless Flash Trigger for Canon</li>
<li>Manual</li>
</ul>

Godox XPro II TTL Wireless Flash Trigger for Canon Cameras

Godox Xnano TTL Wireless Trigger For Nikon X3 N
Product Highlights
<ul>
<li>2.4GHz</li>
<li>Compatible with Nikon i-TTL</li>
<li>Touchscreen Interface</li>
<li>32 Channels:99 IDs</li>
<li>Compact and Portable</li>
<li>Range:100m</li>
<li>Included USB-Cable &amp; Carry Bag</li>
<li>High-Speed,1st &amp; 2nd Curtain Sync</li>
<li>Inbuilt Rechargeable Battery</li>
<li>Weight:48g</li>
</ul>
Overview
The Xnano N Touchscreen TTL Wireless Flash Trigger comes as a compact and lightweight,with a straightforward design. The trigger features an intuitive touchscreen interface and local controls allowing access to your different settings.The Godox Xnano N offers you a wireless range of 100m with 2.4GHz frequency. It is also compatible with Nikon&#8217;s i-TTL system and can support high-speed sync of upto 1/8000 second. The Xnano N Touchscreen trigger also comes with a USB-C port for firmware updates and also charging the unit.Its sleek design and sixe allows for easy portability and use.
&nbsp;
Features of Godox Xnano N
In-Built Rechargeable Battery
&nbsp;
The Xnano N comes with an integrated 850mAh battery that charges in two hours using the USB-C cable.
&nbsp;
Touchscreen Interface
&nbsp;
The panel displays modeling lamp control,power output level as well as battery level indicator.The screen also allows you to adjust brightness levels
&nbsp;
Notable Capability
&nbsp;
You can easily access all 32 channels and 99 wireless ID settings in order ro esnure maximum reliabiltiy and control.The Xnano trigger gives you both manual and TTL modes as well as multi flash and scond cutrain sync.The Xnano N is compatible with both 1XR/TR receivers.
&nbsp;
In the Box
<ul>
<li>Godox Xnano TTL Wireless Trigger For Nikon X3 N</li>
<li>USB-C Charging Cable</li>
<li>Carry Case</li>
</ul>

Godox Xnano TTL Wireless Trigger For Nikon X3 N

Godox Xnano TTL Wireless Trigger For Canon X3 C
Product Highlights
<ul>
<li>Compatible with Canon i-TTL</li>
<li>2.4GHz</li>
<li>Touchscreen</li>
<li>32Channels:99 IDs</li>
<li>Compact and Portable</li>
<li>Range:100m</li>
<li>Included USB-Cable &amp; Carry Bag</li>
<li>High-Speed,1st &amp; 2nd Curtain Sync</li>
<li>Inbuilt Rechargeable Battery</li>
<li>Weight:48g</li>
</ul>
Overview
The Xnano C Touchscreen TTL Wireless Flash Trigger comes as a compact and lightweight,with a straightforward design. The trigger features an intuitive touchscreen interface and local controls allowing access to your different settings.The Godox Xnano C offers you a wireless range of 100m with 2.4GHz frequency. It is also compatible with Canon&#8217;s i-TTL system and can support high-speed sync of upto 1/8000 second. The Xnano C Touchscreen trigger also comes with a USB-C port for firmware updates and also charging the unit.Its sleek design and sixe allows for easy portability and use.
Features of Godox Xnano X3 C
<ul>
<li>In-Built Rechargeable Battery</li>
<li>The Xnano C comes with an integrated 850mAh battery that charges in two hours using the USB-C cable.</li>
<li>Touchscreen Interface</li>
<li>The panel displays modeling lamp control,power output level as well as</li>
<li>battery level indicator.</li>
<li>Adjust brightness levels</li>
<li>Notable Capability</li>
<li>You can easily access all 32 channels and 99 wireless ID settings in order ro esnure maximum reliabiltiy and control.The Xnano trigger gives you both manual and TTL modes as well as multi flash and scond cutrain sync.The Xnano C is compatible with both 1XR/TR receivers</li>
</ul>
In the Box
<ul>
<li>Godox Xnano TTL Wireless Trigger For Canon X3 C</li>
<li>USB-C C</li>
<li>harging Cable</li>
<li>Carry Bag</li>
</ul>

Godox Xnano TTL Wireless Trigger For Canon X3 C

Godox X3Pro S Touchscreen TTL Wireless Flash Trigger for Sony
Product Highlights
<ul>
<li>Works with X Wireless Radio System</li>
<li>Compatible with Sony ADI / P-TTL</li>
<li>Frequency: 2.4 GHz; Range: 328&#8242;</li>
<li>16 Groups; 32 Channels; 99 IDs</li>
<li>Bluetooth App Connectivity</li>
<li>Shutter Control &amp; AF Function</li>
<li>Larger Touchscreen &amp; Multi-Group Display</li>
<li>Runs on Internal Rechargeable Battery</li>
<li>Portable Design</li>
<li>Includes USB-C Cable &amp; Pouch</li>
</ul>
Overview of the Godox X3Pro S Touchscreen TTL Wireless Flash Trigger for Sony
Experience TTL-enabled wireless flash lighting with the Godox X3Pro S Touchscreen TTL Wireless Flash Trigger. This upgraded Pro version of the popular X3 features a larger 2.4” color touchscreen, offering precise fingertip control and a more intuitive, responsive interface. The expanded screen allows for comfortable navigation, while the Pro model adds a host of practical improvements, all within a compact and lightweight design.
&nbsp;
Fully compatible with Sony cameras, the X3Pro S supports multiple advanced features, including multi-group displays for up to four groups, remote shutter control, and AF functionality. Bluetooth connectivity via the Godox app gives you full creative control, enabling remote adjustment of flash power, group settings, and trigger functions. For portability, the X3Pro S comes with a convenient pouch, making it easy to take on-location shoots without compromising performance or mobility.
&nbsp;
In the Box
<ul>
<li>Godox X3Pro S Touchscreen TTL Wireless Flash Trigger for Sony</li>
<li>USB-C Charging Cable</li>
<li>Pouch</li>
</ul>

Godox X3Pro S Touchscreen TTL Wireless Flash Trigger for Sony

Godox X3Pro C Touchscreen TTL Wireless Flash Trigger for Canon
Product Highlights
<ul>
<li>Works with X Wireless Radio System</li>
<li>Compatible with Canon E-TTL / E-TTL II</li>
<li>Frequency: 2.4 GHz; Range: 328&#8242;</li>
<li>16 Groups; 32 Channels; 99 IDs</li>
<li>Bluetooth App Connectivity</li>
<li>Shutter Control &amp; AF Function</li>
<li>Larger Touchscreen &amp; Multi-Group Display</li>
<li>Runs on Internal Rechargeable Battery</li>
<li>Portable Design</li>
<li>Includes USB-C Cable &amp; Pouc</li>
</ul>
Overview of the Godox X3Pro C Touchscreen TTL Wireless Flash Trigger for Canon
The Godox X3 Pro C is fully compatible with Canon’s E-TTL and E-TTL II systems, enabling fast and accurate automatic flash exposure and metering. As part of the Godox X wireless radio ecosystem, it operates on a stable 2.4 GHz frequency to reliably trigger compatible flashes. Designed with both hybrid creators and professional photographers in mind, the X3 Pro C pairs quickly with supported Canon cameras and delivers a lightweight, streamlined triggering solution for both studio and on-location work.
&nbsp;
Wireless performance is strong and dependable, even in environments with heavy signal interference. The X3 Pro C offers a long transmission range of up to 328 feet, allowing photographers to control lighting setups with confidence. Users can organize complex lighting arrangements using up to 16 groups across 32 channels, while 99 wireless ID options help minimize interference from other nearby systems, ensuring consistent and reliable operation.
&nbsp;
For professional workflows, the X3 Pro C includes multiple shooting modes to suit different scenarios. One-Shoot mode is ideal for solo photographers, sending only the trigger signal for simple setups. All-Shoot mode supports group sessions or multi-photographer environments by transmitting both trigger and setting information. The dedicated L-858 mode integrates seamlessly with optional Sekonic L-858 light meters, allowing meter-based flash synchronization for precise exposure control.
&nbsp;
Usability is further enhanced by a large, responsive 2.4-inch color touchscreen paired with an intuitive menu layout for quick on-camera adjustments. The X3 Pro C can function as a traditional on-camera trigger or connect wirelessly to the Godox Flash app via Bluetooth, enabling remote control of flash power, group settings, and triggering directly from a smartphone or tablet. When working without a mobile device, all essential functions remain easily accessible through the touchscreen interface.
&nbsp;
Each lighting group can be adjusted independently, including power output, zoom settings, modeling lamp control, and TCM (TTL Convert to Manual). Users can save and instantly recall custom settings, significantly improving shooting efficiency. The main interface allows monitoring of up to four groups at once, making real-time adjustments faster and more intuitive during demanding shoots. Powering the X3 Pro C is a built-in rechargeable lithium battery, a popular feature carried over into the Pro version. Charging is handled via USB-C, with a full charge taking approximately two hours and offering up to one month of standby time, ensuring the trigger is always ready when needed.
&nbsp;
With the addition of optional Godox receivers, the X3 Pro C expands its functionality even further. Features such as wireless shutter release, timed shooting, and time-lapse photography become available, allowing photographers to set exposure duration, intervals, and frame counts with precision. Triggering via the sync port or receivers also helps reduce camera vibration, making it ideal for long exposures and critical image capture.
&nbsp;
In the Box
<ul>
<li>Godox X3Pro C Touchscreen TTL Wireless Flash Trigger for Canon</li>
<li>USB-C Charging Cable</li>
<li>Pouch</li>
</ul>

Godox X3Pro C Touchscreen TTL Wireless Flash Trigger for Canon

Godox X2T S TTL Wireless Flash Trigger for Sony
Highlights
<ul>
<li>Wireless Transmitter for Flash</li>
<li>Frequency: 2.4 GHz, 32 Channels</li>
<li>Wireless Range: 328.1&#8242;</li>
<li>High Speed Sync up to 1/8000 sec</li>
</ul>
Overview
This X2T TTL wireless flash trigger from Godox is one that is dedicated to Sony&#8217;s TTL system and operates on a 2.4 GHz frequency. It can fire a single flash or multiple dedicated flash units within 5 groups, 32 channels, and 99 ID settings to avoid interference from other nearby systems. For the added convenience, the integrated scan setting function can help you automatically locate an ID channel with the least interference. You can also operate the flash units within a wireless range up to 328&#8242;.
&nbsp;
Additionally, this trigger has a large LCD display that enables you to view all the settings. Also, a USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord. The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth. The app can control the same functions as the wireless trigger such as the flash mode, power output, the modeling light, high speed sync, and the audible beep of Godox flashes. Finally, it has a hot shoe Quick Lock that ensures that the wireless trigger stays secure on the camera&#8217;s hot shoe.
&nbsp;
In the package
Godox X2T 2.4 GHz TTL Wireless Flash Trigger for Sony

Godox X2T S TTL Wireless Flash Trigger for Sony

Godox X2T N TTL Wireless Flash Trigger for Nikon
Highlights
<ul>
<li>Wireless Transmitter for Flash</li>
<li>Frequency: 2.4 GHz, 32 Channels</li>
<li>Wireless Range: 328.1&#8242;</li>
<li>High Speed Sync up to 1/8000 sec</li>
</ul>
Overview
This X2T TTL wireless flash trigger from Godox is one that is dedicated to Nikon&#8217;s i-TTL system and operates on a 2.4 GHz frequency. It can fire a single flash or multiple dedicated flash units within 5 groups, 32 channels, and 99 ID settings to avoid interference from other nearby systems. For the added convenience, the integrated scan setting function can help you automatically locate an ID channel with the least interference. You can also operate the flash units within a wireless range up to 328&#8242;.
&nbsp;
Additionally, this trigger has a large LCD display that enables you to view all the settings. Also, a USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord. The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth. The app can control the same functions as the wireless trigger such as the flash mode, power output, the modeling light, high speed sync, and the audible beep of Godox flashes. Finally, it has a hot shoe Quick Lock that ensures that the wireless trigger stays secure on the camera&#8217;s hot shoe.
&nbsp;
In the package
Godox X2T 2.4 GHz TTL Wireless Flash Trigger for Nikon

Godox X2T N TTL Wireless Flash Trigger for Nikon

Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon
Highlights
<ul>
<li>Compatible with Nikon i-TTL</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 328&#8242;</li>
<li>32 Channels; 5 Groups</li>
</ul>
Overview
The X1R-N TTL Wireless Flash Trigger Receiver from Godox is a 2.4 GHz system that is compatible with Nikon cameras and flashes that support i-TTL for automatic exposure and metering, making it an excellent choice for shooters who need to work quickly. It also has an outstanding range of 328&#8242; and can be set to one of 32 channels for limiting interference with other nearby systems. Another huge benefit is the ability to control up to five groups at a time, or set the unit to ratio flash mode for three groups with varying power relative to one another.
&nbsp;
Users will have access to many settings through the backlit LCD found on the rear of the receiver. This enables the adjustment of settings such as sync delay and triggering modes. Also, through i-TTL compatibility the receiver will support high-speed sync, flash exposure compensation, and flash exposure lock, among other settings. Beyond this, users will be able to easily mount their flash to the receiver&#8217;s top hot shoe, or you can connect a camera or studio strobe via the 2.5mm sync terminal. Additionally, the receiver runs on two AA batteries and has a micro-USB port for firmware updates.
&nbsp;
Included in the box
<ul>
<li>Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon</li>
<li>N1 Camera Sync Cable</li>
<li>N3 Camera Sync Cable</li>
<li>2.5mm to 1/4&#8243; Flash Sync Cable</li>
<li>3.5mm to 1/4&#8243; Adapter</li>
</ul>

Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon

Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon
Highlights
<ul>
<li>Compatible with Canon E-TTL / E-TTL II</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: 328&#8242;</li>
<li>32 Channels; 5 Groups</li>
</ul>
Overview
The X1R-C TTL Wireless Flash Trigger Receiver from Godox is a 2.4 GHz system that is compatible with Canon cameras and flashes that support E-TTL / E-TTL II for automatic exposure and metering, making it an excellent choice for shooters who need to work quickly. It also has an outstanding range of 328&#8242; and can be set to one of 32 channels for limiting interference with other nearby systems. Another huge benefit to it is the ability to control up to five groups at a time, or set the unit to ratio flash mode for three groups with varying power relative to one another.
&nbsp;
Users will have access to many settings through the backlit LCD found on the rear of the receiver. This enables the adjustment of settings such as sync delay and triggering modes. Also, through E-TTL / E-TTL II compatibility the receiver will support high-speed sync, flash exposure compensation, and flash exposure lock, among other settings. Beyond this, users will be able to easily mount their flash to the receiver&#8217;s top hot shoe, or you can connect a camera or studio strobe via the 2.5mm sync terminal. Additionally, the receiver runs on two AA batteries and has a micro-USB port for firmware updates.
&nbsp;
Included in the box
<ul>
<li>Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon</li>
<li>C1 Camera Sync Cable</li>
<li>C3 Camera Sync Cable</li>
<li>2.5mm to 1/4&#8243; Flash Sync Cable</li>
<li>3.5mm to 1/4&#8243; Adapter</li>
</ul>

Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon

Godox X1N TTL Wireless Flash Trigger (Transmitter and Receiver) Set for Nikon
Product Highlights
<ul>
<li>Transmitter and Receiver Set</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: &gt;100m (328&#8242;)</li>
<li>Compatible with Nikon i-TTL</li>
</ul>
Overview
The X1N TTL Wireless Flash Trigger Set from Godox is a reliable and TTL-enabled wireless flash trigger set with a 2.4 GHz frequency system. This system is fully compatible with Nikon cameras and flashes that support i-TTL for automatic exposure and metering, making it an excellent choice for shooters who need to work quickly. It includes both a transmitter and receiver, providing the essential components needed for achieving a wireless lighting configuration.
&nbsp;
Godox X1T-N TTL Wireless Flash Trigger Transmitter
It operates up to a range 100m (328&#8242;) and can be set to one of 32 channels for limiting interference with other nearby systems. You can also control up to five groups at a time, or set the unit to ratio flash mode for three groups with varying power relative to one another.
&nbsp;
From the backlit LCD, you can make adjustments to many settings such as sync delay and triggering modes. Also, through i-TTL compatibility the system will support high-speed sync, flash exposure compensation, and flash exposure lock, among other settings. In addition, the users will be able to easily mount their flash to the transmitter&#8217;s top hot shoe, or you can connect a studio strobe via the PC sync terminal on the receiver or PC sync terminal on the transmitter. Finally, it runs on two AA batteries and has a micro-USB port for firmware updates.
&nbsp;
Godox X1R-N TTL Wireless Flash Trigger Receiver
This is also a 2.4 GHz frequency system that is compatible with Nikon cameras and flashes that support i-TTL for automatic exposure and metering. Just as the X1T-N Transmitter, the receiver works upto a range of 100m, can be set to one of 32 channels, control up to five groups at a time, or set the unit to ratio flash mode for three groups with varying power relative to one another.
&nbsp;
The backlit LCD screen provides users with the ability to adjust many settings like sync delay and triggering modes. Also, through i-TTL compatibility the receiver will support high-speed sync, flash exposure compensation, and flash exposure lock, among other settings. You can also mount your flash easily to the receiver&#8217;s top hot shoe, or you can connect a camera or studio strobe via the 2.5mm sync terminal. It also runs on two AA batteries and has a micro-USB port for firmware updates.
&nbsp;
In the box
<ul>
<li>1 x Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon</li>
<li>1 x Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon</li>
<li>1 x 2.5mm to 1/4&#8243; Flash Sync Cable</li>
<li>1 x N1 Camera Sync Cable</li>
<li>1 x N3 Camera Sync Cable</li>
<li>1 x 3.5mm to 1/4&#8243; Adapter</li>
<li>User&#8217;s Manual</li>
</ul>

Godox X1N TTL Wireless Flash Trigger (Transmitter and Receiver) Set for Nikon

Godox X1C TTL Wireless Flash Trigger (Transmitter and Receiver) Set for Canon
Product Highlights
<ul>
<li>Transmitter and Receiver Set</li>
<li>Frequency: 2.4 GHz</li>
<li>Range: &gt;100m (328&#8242;)</li>
<li>Compatible with Canon E-TTL / E-TTL II</li>
</ul>
Overview
The X1C TTL Wireless Flash Trigger Set from Godox is a reliable and TTL-enabled wireless flash trigger set with a 2.4 GHz frequency system. This system is fully compatible with Canon cameras and flashes that support E-TTL / E-TTL II for automatic exposure and metering, making it an excellent choice for shooters who need to work quickly. It includes both a transmitter and receiver, providing the essential components needed for achieving a wireless lighting configuration.
&nbsp;
Godox X1T-C TTL Wireless Flash Trigger Transmitter
It operates upto a range 100m (328&#8242;) and can be set to one of 32 channels for limiting interference with other nearby systems. You can also control up to five groups at a time, or set the unit to ratio flash mode for three groups with varying power relative to one another.
&nbsp;
From the backlit LCD, you can make adjustments to many settings such as sync delay and triggering modes. Also, through E-TTL / E-TTL II compatibility the system will support high-speed sync, flash exposure compensation, and flash exposure lock, among other settings. In addition, the users will be able to easily mount their flash to the transmitter&#8217;s top hot shoe, or you can connect a studio strobe via the PC sync terminal on the receiver or PC sync terminal on the transmitter. Finally, it runs on two AA batteries and has a micro-USB port for firmware updates.
&nbsp;
Godox X1R-C TTL Wireless Flash Trigger Receiver
This is also a 2.4 GHz frequency system that is compatible with Canon cameras and flashes that support E-TTL / E-TTL II for automatic exposure and metering. Just as the X1T-C Transmitter, the receiver works upto a range of 100m, can be set to one of 32 channels, control up to five groups at a time, or set the unit to ratio flash mode for three groups with varying power relative to one another.
&nbsp;
The backlit LCD screen provides users with the ability to adjust many settings like sync delay and triggering modes. Also, through E-TTL / E-TTL II compatibility the receiver will support high-speed sync, flash exposure compensation, and flash exposure lock, among other settings. You can also mount your flash easily to the receiver&#8217;s top hot shoe, or you can connect a camera or studio strobe via the 2.5mm sync terminal. It also runs on two AA batteries and has a micro-USB port for firmware updates.
&nbsp;
In the box
<ul>
<li>1 x Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon</li>
<li>1 x Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon</li>
<li>1 x 2.5mm to 1/4&#8243; Flash Sync Cable</li>
<li>1 x C1 Camera Sync Cable</li>
<li>1 x C3 Camera Sync Cable</li>
<li>1 x 3.5mm to 1/4&#8243; Adapter</li>
</ul>

Godox X1C TTL Wireless Flash Trigger (Transmitter and Receiver) Set for Canon

Godox Witstro H200R Round Flash Head for AD200 TTL Pocket Flash
Product Highlights
<ul>
<li>Its an optional accessory for a Magnetic Mount</li>
<li>Fits onto Godox AD200 Flash</li>
<li>Provides for soft and even light via it&#8217;s spiral flash tube design</li>
<li>Generates 200Ws Flash Output</li>
</ul>
Overview
The Witstro H200R Round Flash Head from Godox is a 3-inch diameter head that can be attached seamlessly to the AD200 series of flashes, thus allowing it to tap into its 200Ws reservoir of power and output a soft, wide beam of light with gentle falloff and a minimized hot spot. This is achieved by use of the H200R&#8217;s spiral flash tube. The head also has a 4.3W modeling light to allow you to preview your final shot.
&nbsp;
To allow it&#8217;s users to use even more light modifiers, this flash head features a magnetic front accessory port for fast attachment of optional accessories such as barndoors, a honeycomb grid, a snoot, and diffusion, color filters and/or Godox AK-R1 Accessory Kit.
&nbsp;
In the Box
Godox Witstro H200R Round Flash Head for AD200 TTL Pocket Flash
Carrying pouch

Godox Witstro H200R Round Flash Head for AD200 TTL Pocket Flash

Godox WB29 Lithium-Ion Battery Pack for AD200
Product Highlights
<ul>
<li>For AD200 Pocket Flash</li>
<li>500 Full-Power Flashes per Charge</li>
<li>Charging Time: 4 Hours</li>
</ul>
Overview
This Lithium-Ion battery pack from Godox keeps your AD200 pocket flash powered up. You can acquire it separately to replace the one included in the pocket flash or as a spare. With a voltage of 14.4V and a capacity of 2900mAh, this pack is able to provide approximately 500 full-power flashes on a single charge. Additionally, it is able to be completely charged in about 4 hours.
&nbsp;
In the package
1 x Godox WB29 Li-Ion battery for AD200

Godox WB29 Lithium-Ion Battery Pack for AD200

Godox VSA-GS3 Gobo Set
Product Highlights
<ul>
<li>6 x Gobos for Godox VSA spotlight attachment</li>
<li>Enables Various Patterns to be Projected</li>
<li>Ideal for Scenery, Actors, Fashion</li>
</ul>
Overview of the Godox VSA-GS3 Gobo Set
The Godox Gobo Set VSA-GS3 is a collection of 6 gobos for use with the multi-faceted Projection Attachment to create an artistic background with the intriguing patterns in the set. These character-shapes can be used in theater, video, film, or fashion work. The GS3 set has such patterns as a star, wheel and horizontal line.
&nbsp;
In the Box
6 x VSA-GS3 Gobos for Projection Attachment

Godox VSA-GS3 Gobo Set

Godox VSA-GS2 Gobo Set
Product Highlights
<ul>
<li>6 x Gobos for Godox VSA spotlight attachment</li>
<li>Enables Various Patterns to be Projected</li>
<li>Ideal for Scenery, Actors, Fashion</li>
</ul>
Overview of the Godox VSA-GS2 Gobo Set
The Godox Gobo Set VSA-GS2 is a collection of 6 gobos for use with the multi-faceted Projection Attachment to create an artistic shapes in your photos with the intriguing patterns in the set. These character-shapes can be used in theater, video, film, or fashion work. This set has such patterns as trees, hearts, and stars.
&nbsp;
In the Box
6 x VSA-GS2 Gobos for Projection Attachment

Godox VSA-GS2 Gobo Set

Godox VSA-GS1 Gobo Set
Product Highlights
<ul>
<li>6 x Gobos for Spotlight Attachment</li>
<li>Enables Various Patterns to be Projected</li>
<li>Ideal for Scenery, Actors, Fashion</li>
</ul>
Overview of the Godox VSA-GS1 Gobo Set
The Godox Gobo Set VSA-GS1 is a collection of 6 gobos for use with the multi-faceted Projection Attachment to add character to your creative work. These character-shapes can be used in theater, video, film, or fashion work. This set has such patterns as fire, breakup, and the moon.
&nbsp;
In the Package
6 x Gobo for VSA Projection Attachment

Godox VSA-GS1 Gobo Set

Godox VSA-26° Spotlight Lens Projector Kit
Product Highlights
<ul>
<li>Exchangeable lenses, Bowens Mount</li>
<li>LED light limit: 300W</li>
<li>Cutting: for Spotlight , Sharp Edges</li>
<li>Project beams and patterns with Gobos</li>
<li>Measures 20.3 x 9.5 x 7.7&#8243;</li>
</ul>
Overview of the Godox VSA-26° Spotlight Lens Projector Kit
The Godox VSA-26° Spotlight Lens Projector Kit is a Bowens Mount attachment kit with a 26° lens for use with LED lights to achieve dramatic or theatrical effects. It not only fits onto Godox lights but also those from other manufacturers that use the popular Bowen&#8217;s mount. It works by providing an evenly concentrated illumination circle from the center of the beam to the edges.
&nbsp;
The lens narrows the light&#8217;s wide beam angle while the gobos included allow you to make sharp cuts and/or patterns in your setup. This kit also has a filter holder in front of the lens.
&nbsp;
Creativity Options
Cutting
The attachment has built-in shutter blades that help to control light to cut-off light where you do not want it on your subject.
&nbsp;
Shaping
The included gobo (others separately available) helps to create an artistic background with patterns.
&nbsp;
Focusing
You can control the intensity of your light&#8217;s beam using an Iris Diaphragm (separate purchase). By pushing the lever you can adjust the beam from spot to flood smoothly.
Coloring
You can add color to your setup with color gels (separate purchase).
&nbsp;
Interchangeable Lens
This kit is supplied with the 26° spot lens. However, there are two more optional lenses that can be used with the attachment mount. They are 19° and 36° (both are bought separately).
&nbsp;
In the Package
<ul>
<li>Godox VSA-26° Spot Lens</li>
<li>Spot Light Mount</li>
<li>Gobo Holder</li>
<li>3 x Gobos</li>
<li>Gel Frame</li>
<li>Carrying Bag</li>
</ul>

Godox VSA-26° Spotlight Lens Projector Kit

Godox VSA-11C 15-Filter Color Effects Set for Spotlight Attachment
Overview
The Godox 15-Filter contains upto 15 creative filters that allow you to add a special tough to your images. The set includes the following colors #162 Bastard Amber filter, #010 Straw, #013 Light Amber, #108 Light Flame #105 Golden Amber, #182 Light Red, #035 Light Pink, #002 Middle Rose, #169 Light Rose Purple,#048 Surprise Pink, #063 No Color Blue, #196 Daylight Blue, #075 Primary Blue, #089 Moss Green, and a #116 Blue Green filter.
&nbsp;
In the Box
<ul>
<li>#162 Bastard Amber Filter</li>
<li>#010 Straw Filter</li>
<li>#013 Light Amber Filter</li>
<li>#108 Light Flame Filter</li>
<li>#105 Golden Amber Filter</li>
<li>#182 Light Red Filter</li>
<li>#035 Light Pink Filter</li>
<li>#002 Middle Rose Filter</li>
<li>#169 Light Rose Purple Filter</li>
<li>#048 Surprise Pink Filter</li>
<li>#063 No Color Blue Filter</li>
<li>#196 Daylight Blue Filter</li>
<li>#075 Primary Blue Filter</li>
<li>#089 Moss Green Filter</li>
<li>#116 Blue Green Filter</li>
</ul>

Godox VSA-11C 15-Filter Color Effects Set for Spotlight Attachment

Godox TimoLink TRX Wireless DMX Transceiver
Product Highlights
Single Unit Transmitter and Receiver
Up to 656&#8242; Long-Range Transmission
LumenRadio CRMX Technology
5-Pin Male XLR Connector Rotates 270°
Built-In Signal Indicators
Test Function Checks Connection Status
Overview of the Godox TimoLink TRX Wireless DMX Transceiver
The TimoLink TRX Wireless DMX Transceiver is an all-in-one DMX that works as a transmitter for DMX controllers and a receiver with light that have OMX functionality but do not have CRMX receiver capability wirelessly with the LumenRadio CRMX technology. With the TRX, you can easily transform your wired fixtures and controllers into a fully wireless system, improving film and broadcast setups. Its automatic frequency range of upto 300m allows for a stable, interference free DMX signal and can also be contolled remotely using the Godox KNOWLED app.
&nbsp;
It also features five pin XLR connector that rotates up to 270° for wider compatibility with different interface designs and comes with a USB-C for convenience. Lastly, with the in-built signal indicators, it automatically detects whether or not a DMX signal is successfully outputted and has separately featured set and reset buttons for simple operational logic and efficiency.
&nbsp;
In the Box
Godox TimoLink TRX Wireless DMX Transceiver
USB-C Cable

Godox TimoLink TRX Wireless DMX Transceiver

Godox Studio Q Type G Clamp for Propac
Product Highlights
High quality material with strong bearing
Several 1/ 4 and 3 / 8 bracket mounting holes to adjust light ankles flexibly.
Adjustable range from 3 to 45mm
Quickly fix the clip by the screw
Overview of the Godox Studio Q Type G Clamp for Propac
In the Box
1 x Q-Type Clip Clamp

Godox Studio Q Type G Clamp for Propac

Godox Soft Tent for ML30 and ML60 LED Lights
Product Highlights
For use with the ML series LED lights
Diffuses lights
Overview of the Godox ML-CS1625 Soft Tent
This soft tent from Godox for use with the ML series lights is a light modifier that diffuses light to provide even illumination for your subject. It has three head adapters: a round head adapter, godox mount adapter and rectangle to round head adapter.
&nbsp;
Round head adapter
This allows for this dome to be used with round head flashes such as the V1 speedlites and AD100Pro pocket flashes.
&nbsp;
Godox mount adapter
This allows for the dome to be used with such lights as ML30, ML30Bi, ML60, ML60Bi, AD300Pro, AD400Pro.
&nbsp;
Rectangle to round head adapter
This allows for the dome to be used with most square head flashes. These include TT600, TT685II, TT560II, V850III, V860II, V860III, YN560IV, YN560III. (Note: the ML-CS1625 Diffusion Dome can&#8217;t fit the TT350 Flash)
&nbsp;
In the Box
Godox Soft Tent for Dainty ML30 and ML30Bi LED Lights
Mount Adapter
Round Head Adapter
Rectangle to Round Head Adapter

Godox Soft Tent for ML30 and ML60 LED Lights

Godox SN-05 Pro Snoot (Bowens Mount, Black)
Product Highlights
Narrowly focuses the light output
Bowens Mount compatible
Ideal for portrait and product photography
Overview
This Snoot is a Bowens Mount fit for strobes that is fitted over the head and narrows the output into a soft circle that is smaller while it moves closer to the subject and grows larger in vice versa. The snoot is ideal for creative effects on backgrounds or for hair or accent light. It is sort of a tunnel for the light to go through that will restrict it in all directions except for the exact direction the strobe is pointed.
&nbsp;
In the box
1 x Godox SN-05 Pro Snoot

Godox SN-05 Pro Snoot (Bowens Mount, Black)

Godox Slide Set 5 for AK-R21 Projection Kit (AK-S05, 10pcs
Product Highlights
For use with Godox AK-R21 flash projector
10 Slides, each with different patterns
Brings stunning shapes, colors, and artistic elements to your images.
Overview of the Godox AK-S05 Slide for AK-R21
This Godox AK-S05 set of slides contains a total of 10 creative effects slides with different shapes and colors for use with the AK-R21 projection attachment to bring creative artistic elements to your images.
&nbsp;
In the Box
10 x Godox AK-S05 slides

Godox Slide Set 5 for AK-R21 Projection Kit (AK-S05, 10pcs)

Godox Slide Set 4 for AK-R21 Projection Kit (AK-S04, 10pcs)
Product Highlights
For use with Godox AK-R21 flash projector
10 Slides, each with different patterns
Brings stunning shapes, colors, and artistic elements to your images.
Overview of the Godox AK-S04 Slide for AK-R21
This Godox AK-S04 set of slides contains a total of 10 creative effects slides with different shapes and colors for use with the AK-R21 projection attachment to bring creative artistic elements to your images.
&nbsp;
In the Box
10 x Godox AK-S04 slides

Godox Slide Set 4 for AK-R21 Projection Kit (AK-S04, 10pcs)

Godox Slide Set 2 for AK-R21 Projection Kit (AK-S02, 10pcs)
Product Highlights
For use with Godox AK-R21 flash projector
10 Slides, each with different patterns
Brings stunning shapes, colors, and artistic elements to your images.
Overview of the Godox AK-S02 Slide for AK-R21
This Godox AK-S02 set of slides contains a total of 10 creative effects slides with different shapes and colors for use with the AK-R21 projection attachment to bring creative artistic elements to your images. The slides in AK-S02 are happy halloween, haunted moon, halloween pattern, haunted house, trio halloween pumpkin, sole halloween pumpkin, halloween night, spooky night, haunted house &amp; wizard, and haunted forest.
&nbsp;
In the Box
10 x Godox AK-S02 slides

Godox Slide Set 2 for AK-R21 Projection Kit (AK-S02, 10pcs)

Godox Slide Set 1 for AK-R21 Projection Kit (AK-S01, 10pcs)
Product Highlights
For use with Godox AK-R21 flash projector
10 Slides, each with different patterns
Brings stunning shapes, colors, and artistic elements to your images.
Overview of the Godox AK-S01 Slide for AK-R21
This Godox AK-S01 set of slides contains a total of 10 creative effects slides with different shapes and colors for use with the AK-R21 projection attachment to bring creative artistic elements to your images. The slides in AK-S01 are woodpile, wooden fence, wooden wall, log cabin wall, bamboo fence, orange argyle, 3D wire net, 3D blocks, christmass cookie pattern, and orange argyle.
&nbsp;
In the Box
10 x Godox AK-S01 slides

Godox Slide Set 1 for AK-R21 Projection Kit (AK-S01, 10pcs)

Godox Scrim Flag Kit (24X36&#8243;)
Product Highlights
<ul>
<li>1-and 2-Stop Silk Screens</li>
<li>1-and 2-Stop Black Net Screens</li>
<li>5 x Collapsible Flag Frames</li>
<li>Solid Black Screen,2 X Fingers: 4X14&#8243;</li>
<li>2 X Dots: 6&#8243; Diameter</li>
</ul>
Overview
The SF6090 Flag Kit from Godox is a comprehensive set to help control light falling on your subject. Included in the kit is five foldable frames as well as five fabrics. It also provides 1- and 2-stop silk screens for subtle diffusion. For 1- and 2- stop black nets in order to reduce light intensity to help add contrast. Additionally, a solid black fabric is used to block any unwanted light. The light is ideal especially for small projects or those which are tabletop. It also includes a 6&#8243; diameter solid black net as well as a 4X14&#8243; solid black net finger which all fits in its carry case.
&nbsp;
Features of Godox Scrim Flag
Great Control of Lighting Effects
&nbsp;
The Godox Scrim Flag Kit offers an easy way to adjust your lights contrast especially dark and light areas allowing you more control.
&nbsp;
Versatile and Compact
&nbsp;
With the scrim kit, comes 5 flag frames and a fabric screen to be used for shaping, diffusing light and blocking. Also included in the package is 2 fingers and 2 dots which for precise light adjustments especially on small objects.
&nbsp;
Solid Black Blocking Fabric
&nbsp;
A solid black fabric is included perfect for blocking any unwanted light to avoid any shadows.
&nbsp;
Fingers and Dots
&nbsp;
The fingers and dots allow solid fabrics allow you to shape your light on a smaller scale for work such as tabletop imaging.
&nbsp;
Portable and Easy to Use
&nbsp;
Its carry case has more than enough room for quick and easy setup. It also has a huge hand for comfortable carrying of the scrim.
&nbsp;
1-Stop Silk Screen
&nbsp;
This provides for moderate diffusion, lowers contrast and opens up shadows while retaining some snap.
&nbsp;
2-Stop Silk Screen
&nbsp;
This offers diffusion for a softer look.
&nbsp;
In the Box
<ul>
<li>Godox Scrim Flag Kit (24 x 36&#8243;)</li>
<li>5 x Foldable Screen Frame</li>
<li>Solid Black Fabric</li>
<li>Black Net Single Screen</li>
<li>Black Net Double Screen</li>
<li>1-Stop Silk Screen</li>
<li>2-Stop Silk Screen</li>
<li>Solid Black Dot</li>
<li>Solid Black Finger</li>
<li>Black Net Finger</li>
<li>Carry Case</li>
</ul>

Godox Scrim Flag Kit (24X36")

Godox S2 Speedlite Bracket for Bowens
Highlights
Maximize Flash w/ Bowens Accessories
Tilting Bracket with 5/8&#8243; Receiver
Non-Scratch Mounting w/o Touch-Fasteners
Overview
The Bowens S2 Speedlite Bracket from Godox is a more compact and portable S-type bracket than the original Speedlite Bracket. It lets you maximize on your use of on-camera flashes while giving you the opportunity to use Bowens accessories. The bracket supports your flash either vertically or horizontally, employing non-scratching, light pressure rather than touch-fasteners or tape. Light modifiers such as reflectors, softboxes, and snoots mount to the front of the bracket as they would on a Bowens flash head. The bracket tilts nearly 180 degrees and has a 5/8&#8243; receiver for stand mounting.
&nbsp;
More about the S2 bracket:
Requires no pre-assembly or post disassembly
Its adjustable to fit most brands of speedlites
Mounts with light pressure &#8211; no touch-fasteners
Mounts speedlite vertically or horizontally
Allows use of studio light modifiers like softboxes
Umbrella input channel
Compatible with full-size flash heads such as the Godox AD400Pro
Included in the box
Godox S2 Speedlite Bracket for Bowens

Godox S2 Speedlite Bracket for Bowens

Godox S-type Bracket Bowens S Mount Holder
Description:
As an optimized patented product, Godox S-type speedlite bracket is superior: all-in-one, smaller size, portable design, no assembly/disassembly, and easy mounting system. Quickly add Bowens-mount lighting accessories to get creative lighting effects.
&nbsp;
FEATURES:
No pre-assembly &amp; post-disassembly. Smaller size, lighter weight, &amp; less occupied space
Unique speedlite mounting way: mounted horizontally or vertically by wrapping speedlite body
Reliable mounting: not require Velcro, no pressure on hotshoe, no metal scratches on speedlites
Mount size is adjustable to fit all brands of speedlites and even Godox AD-360
Bowens mount adds most studio flash accessories, e.g. softbox, reflector, beauty dish, etc
Umbrella input hole is available and adjusting lighting direction with handle is supported
&nbsp;
SPECFICATION:
Model: S-type
Structure: Compressed and flat structure takes up little space.
Mounting Method: peedlite body is hold and fixed by a big mount, which provides a stable and secure support.
Installation: No pre-assembly and post-disassembly.
Functions: With Bowens-mount, Speed ring, Umbrella input, Direction-adjustable handle, Horizontally-movable ability.
Material: Durable plastics
Dimension (L x W x H): Approx. 15—5.5—22cm
Total Weight: Approx. 555g
&nbsp;
Package Included:
Godox S-Type Speedlite Bracket

Godox S-type Bracket Bowens S Mount Holder

Godox S-R1 Round Head Magnetic Modifier Adapter
The S-R1 is a quick and effective way to breathe life into your older flashes by turning them into round head speedlites.
&nbsp;
The Godox Round head accessories adapter S-R1 can make any flash e.g.: V860II, yongnuo yn560iv or even a Nikon SB-700 install AK-R1 round head accessories to achieve creative light effects. Compatible with most
&nbsp;
The S-R1 adapter slides onto rectangular flash heads to provide a round magnetic mounting point. Rubber mats on the inside surface of the adapter provide scratch-free grip, and a screw on top helps tighten the adapter around flashes of different sizes.

Godox S-R1 Round Head Magnetic Modifier Adapter

Godox RT-16 Wireless 16 Channels Studio Flash Trigger Kit (Transmitter and Receiver)
Overview
Wireless Flash Trigger
Supports up to 16 channels
Transmitter Power Input: 23A 12V battery (included)
Receiver Power Input: 2 AAA batteries (not included)
Long battery life of trigger: one year or over 20,000 continuous triggers
Plug size of receiver: 3.5mm
Adapter size for receiver plug: 3.5mm &#8211; 6.35mm
Radio working frequency: 433MHz
In the package
1 x Hot Shoe Transmitter
1 x Receiver
1 x 3.5mm to 6.35mm plug adapter

Godox RT-16 Wireless 16 Channels Studio Flash Trigger Kit (Transmitter and Receiver)

Godox Projection Pro Kit For LED Light with Bowens Adapter plus Lenses
Product Highlights
<ul>
<li>Includes a 85mm Lens, 60mm lens, 105mm lens, Iris, and Framing Shutters</li>
<li>Also comes with a Gobo Holder and Set of 4 Gobos</li>
<li>Has a Bowens Mount Adapter</li>
<li>Provides for both Focused or Unfocused Light Projection</li>
<li>Enables the projection of Gobo Patterns on Surfaces</li>
<li>Allows Pronounced Selective Lighting</li>
</ul>
Overview
This modifier from Godox acts just like an optical snoot and allows you to project creative effects in your scenery. This kit includes: a Bowens mount adapter, a 60mmlens, 85mm lens, and 105mm lens as well as an iris diaphragm, shutter blades, gobos, a gobo holder and color gels.
&nbsp;
In the Box
Godox Projection Attachment
&#8211; Lens Barrel
&nbsp;
60mm Lens
85mm Lens
105mm Lens
Godox Iris Diaphragm for Projection Attachment
Godox Framing Shutters for Projection Attachment (Set 4)
Godox Gobo Set 4
&#8211; 6 x Gobo
Godox Gobo Set Holder
Godox SA-17 Bowens Mount Adapter

Godox Projection Pro Kit For LED Light with Bowens Adapter plus Lenses

Godox Projection Kit for LED Light with Bowens Mount Adapter
Product Highlights
<ul>
<li>Includes a 85mm Lens, Iris, and Framing Shutters</li>
<li>Also comes with a Gobo Holder and Set of 4 Gobos</li>
<li>Has a Bowens Mount Adapter</li>
<li>Provides for both Focused or Unfocused Light Projection</li>
<li>Enables the projection of Gobo Patterns on Surfaces</li>
<li>Allows Pronounced Selective Lighting</li>
</ul>
Overview
This is a light modifier from Godox that is designed to provide creative effects in your scenery, acting just like an optical snoot. This kit includes: a Bowens mount adapter, an 85mm lens, an iris diaphragm, shutter blades, gobos, a gobo holder and color gels.
&nbsp;
In the Box
<ul>
<li>Godox Projection Attachment</li>
<li>&#8211; Lens Barrel &#8211; 85mm Lens</li>
<li>Godox Iris Diaphragm for Projection Attachment</li>
<li>Godox Framing Shutters for Projection Attachment (Set 4)</li>
<li>Godox Gobo Set 4</li>
<li>&#8211; 6 x Gobo</li>
<li>Godox Gobo Set Holder</li>
<li>Godox SA-17 Bowens Mount Adapter</li>
</ul>

Godox Projection Kit for LED Light with Bowens Mount Adapter

Godox NX Power Cable for Nikon Speedlites and PB820/PB960/PB820S Flash Power Packs
Product Highlights
Type: NX Power Cable
Fits Nikon speedlights
Suitable for use with PB960 and PB820 flash battery packs
Cable length: 50cm (not extended), it can extend up to 1.5m
Color: Black
Overview
This is a power cable from Godox that allows tou to connect your Nikon speedlite(s) to a PB960/PB820/PB820S external power supply pack. It is easy to use, with only two terminals, and is suitable for use with PB960 and PB820 flash battery packs. The cable is made up of high quality material that is also abrasion resistant and has high insulation. It fits SB910 SB28 EURO, SB28DX, SB80DX, SB800, SB900 Nikon speedlites and other flash models (Godox, Yongnuo and the likes) with same type of input power port.
&nbsp;
Note: This NX Cable can only work with the PB960/PB820/PB820S power packs, so please make sure you have either of the power packs before you place an order.
&nbsp;
In the box
1 x NX Cable
1 x User Manual (English)

Godox NX Power Cable for Nikon Speedlites and PB820/PB960/PB820S Flash Power Packs

Godox Mount Fresnel Lens with Barndoors for ML60/ML30 FLS5
Highlights
Compatible with ML30 and ML60
Compatible with select LED Lights
10 to 35° Adjustment
Overview
The FLS5 fresnel lens from Godox helps you maximize the light output from your ML30/60 lights. It is designed specifically for Godox LED lights that have a Godox mount.The FLS5 allows you to expand to the maximum output while also maintaining your light quality to all. By simply rotating the focusing dial, you are able to adjust the beam angle between 10° and 35°.The light has bandoors included which also helps shape and direct the spread of the light beam.
&nbsp;
In the Box
Godox Mount FLS5 Fresnel Lens
Carrying Bag
Bandoors

Godox Mount Fresnel Lens with Barndoors for ML60/ML30 FLS5

Godox MLP19K Projection Attachment for ML30 and ML60 LED Lights with 19° Lens
Product Highlights
<ul>
<li>For use with ML30 and ML60 LED lights</li>
<li>Includes a 19° Lens</li>
<li>Produces even light beams</li>
<li>Drop-in slot</li>
<li>Includes six gobos and a gobo holder</li>
<li>Carry bag included</li>
</ul>
Overview of the MG1200Bi Spotlight Mount Kit with 19° Lens
The Godox MLP19K Projection Attachment Kit is a light modifier that is used to shape and control light beams from the ML series of LED lights. This kit includes a 19° lens for a narrow 19° beam spread. Simply attach the projection attachment onto the light and prop them on a light stand. A gobo holder and six gobos are included that project a variety of patterns onto your scene. This kit has a lens, six gobos, a gobo holder and a carry case for storage and transportation.
&nbsp;
In the Box
<ul>
<li>Godox MG1200Bi spotlight mount</li>
<li>Godox 19° lens for G-mount system</li>
<li>Gobo holder</li>
<li>6 x Gobo</li>
<li>Carry bag</li>
</ul>

Godox MLP19K Projection Attachment for ML30 and ML60 LED Lights with 19° Lens

Godox ML-CD15 Diffusion Dome for ML Series LED Lights
Overview of the Godox ML-CD15 Diffusion Dome for ML Series LED Lights
This diffusion dome from Godox is an ideal light modifier for use in small spaces and it works by spreading your beam to 360°. It has three head adapters: a round head adapter, godox mount adapter and rectangle to round head adapter.
&nbsp;
Round head adapter
This allows for this dome to be used with round head flashes such as the V1 speedlites and AD100Pro pocket flashes.
&nbsp;
Godox mount adapter
This allows for the dome to be used with such lights as ML30, ML30Bi, ML60, ML60Bi, AD300Pro, AD400Pro.
&nbsp;
Rectangle to round head adapter
This allows for the dome to be used with most square head flashes. These include TT600, TT685II, TT560II, V850III, V860II, V860III, YN560IV, YN560III. (Note: the ML-CD15 Diffusion Dome can&#8217;t fit the TT350 Flash)
&nbsp;
In the Box
<ul>
<li>Godox Diffusion Dome for ML30 and ML30Bi LED Lights</li>
<li>Round Head adapter</li>
<li>Godox Mount adapter</li>
<li>Rectangle to Round Head adapter</li>
</ul>

Godox ML-CD15 Diffusion Dome for ML Series LED Lights

Godox MG1200Bi Spotlight Mount Kit with 19° Lens
Godox MG1200Bi Spotlight Mount Kit with 19° Len
Product Highlights
<ul>
<li>For use with KNOWLED MG1200Bi LED light</li>
<li>Includes a 19° Lens</li>
<li>Produces even light beams</li>
<li>Drop-in slot</li>
<li>Includes six gobos and a gobo holder</li>
<li>Carry bag included</li>
</ul>
Overview of the MG1200Bi Spotlight Mount Kit with 19° Lens
This Godox MG1200Bi Spotlight Mount Kit is a light modifier that is used to shape and control light beams from the KNOWLED MG1200Bi Bi-Color LED light. This kit includes a 19° lens for a narrow 19° beam spread. This spotlight mount produces even light with a great color temperature accuracy, no brightness shift with great sharpness and clarity from the middle to the edges. The kit has a lens, six gobos, a gobo holder and a carry case for storage and transportation.
&nbsp;
In the Box
<ul>
<li>Godox MG1200Bi spotlight mount</li>
<li>Godox 19° lens for G-mount system</li>
<li>Gobo holder</li>
<li>6 x Gobo</li>
<li>Carry bag</li>
</ul>

Godox MG1200Bi Spotlight Mount Kit with 19° Lens Godox MG1200Bi Spotlight Mount Kit with 19° Lens

Godox JDD E27 150W 240V Modeling Lamp for SK400II, SK300II, MS300 Flash Heads
Overview
This is a 150W modeling lamp for use with select Godox studio lights as a spare or replacement for the lamp that comes with each head. They include Godox SK300II, SK400II, and MS300 flash heads, among others. It is white-colored with a long form factor and installs quickly and easily via its screw-in base.
&nbsp;
In the box
1 x Godox JDD E27 150W 240V Modeling Lamp

Godox JDD E27 150W 240V Modeling Lamp for SK400II, SK300II, MS300 Flash Heads

Godox Iris Diaphragm for Spotlight Attachment
Product Highlights
For use with VSA spotlight attachment
Smoothly adjusts light beams from spot to flood
Overview of the Godox Iris Diaphragm for Spotlight Attachment
Also known as VSA-ID, this Iris Diaphragm from Godox for spotlight attachment is used on the VSA spotlight mount to smoothly adjust your light&#8217;s beams from spot to flood. Move the adjustment handle on the side to control the amount of light passing through as well as the angle of your light output.
&nbsp;
In the Box
Godox Iris Diaphragm for Spotlight Attachment

Godox Iris Diaphragm for Spotlight Attachment

Godox Iris Diaphragm for MLPK Projection Mount
Product Highlights
For use with MLPK Projection Mount
Smoothly adjusts light beams from spot to flood
Overview of the Godox Iris Diaphragm for MLPK Projection Mount
This Iris Diaphragm from Godox is for use with the MLPK spotlight attachment to smoothly adjust your light&#8217;s beams from spot to flood. Move the adjustment handle on the side to control the amount of light passing through as well as the angle of your light output.
&nbsp;
In the Box
Godox MLPK Projection Mount Iris Diaphragm

Godox Iris Diaphragm for MLPK Projection Mount

Godox Infrared Shutter Release Remote Controller IR-N for Nikon
Features
Perfect to avoid camera vibration and get sharper pictures.
Widely used for self portrait shooting
Approx 10m max function distance
Pocket-sized
Built-in infrared receiver
CR2025 battery
Distance: 16ft
Overview
The GODOX IR Series Infrared Remote Control is designed to trigger a camera&#8217;s shutter release remotely from a distance. You can use this IR remote control for taking self portrait. In addition, it helps in preventing the camera from shaking, hence, eliminating blurs on your pictures. It has been proved to be safe and reliable with most Nikon cameras.
&nbsp;
Compatibility
Nikon 1 J2, Nikon 1 J1, Nikon 1 V3, Nikon 1 V1, Nikon 1 V2 , COOLPIX A, COOLPIX P7800, COOLPIX P7700, COOLPIX P7100, COOLPIX P7000, D610, D600, D7100, D7000, D90, D80, D70s, D70, D50, D5300, D5200, D5100, D5000, D3300, D3200, D3000, D60, D40X, D40
&nbsp;
In the package
Godox Infrared Shutter Remote for Nikon

Godox Infrared Shutter Release Remote Controller IR-N for Nikon

Godox HC-01 Honeycomb Grid for Speedlite
features:
honeycomb filter grid allows light to emit in different directions and focus on a smaller area.
produces smooth and natural transitions and contrast lighting effects and shading.
closed on a rubber band, easy to use.
made of aluminum, light and compact design.
Securely attaches to almost all standard presser foot mount flashes using the included adjustable strap.
&nbsp;
technical data:
brand: Godox
type: Honeycomb for speedlite
mode: HC-01
black colour
material: Aluminum and rubber
honeycomb size: Approx. 8.1 * 5.0 * 1.3 cm / 3.2 * 2.0 * 0.5in
honeycomb weight: 12g / 0.4 oz
&nbsp;
Package list:
1 * Honeycomb for Speedlite
&nbsp;
warning:
this item covers only honeycomb structure and does not contain speedlite.

Godox HC-01 Honeycomb Grid for Speedlite

Godox H600P 600W Extension Flash Head for Godox AD600Pro
Product Highlights
Accessory Mount: Bowens S Mount
Number of Heads: Includes 1 Head
Total Watt Seconds: 600ws
Power Type: AC
Overview
The Godox H600P is a 600W bowens mount portable flash head that is designed to fit and work with the Godox AD600pro TTL Flash strobe. It is an off-camera flash light lamp head that allows one to hold the flash head on hand without having to deal with the much weight of the AD600Pro flash. It&#8217;s connecting cable is long enough, thus making shooting more convenient.
&nbsp;
It is an ideal choice for both outdoor and studio photography. The bowens mount adaption also makes this flash head compatible with other bowens mount flash accessories for the AD600 Pro. The operating voltage ranges from 100V to 240V to support worldwide use.
&nbsp;
Note:
The mount fits tightly on the Godox AD600Pro, kindly remove slowly and carefully. Remove the battery before disconnecting the Flashtube or the Extension Head.
This package does NOT include the strobe, AD600Pro, nor does it include the flashtube bulb.
In the Box
1 x Godox H600P 600W Extension Flash Head

Godox H600P 600W Extension Flash Head for Godox AD600Pro

Godox GK50 Multi-Refector Array Grip Kit for KNOWLED LiteFlow
Product Highlights
<ul>
<li>Holds Multiple LiteFlow Reflector Boards</li>
<li>Dedicated Mounting System</li>
<li>One 39.3&#8243; Long Extension Rod</li>
<li>Six Smaller Extension Rods</li>
<li>Ball Joint Arms &amp; Single and Dual Knobs</li>
<li>Four Clamps with Ratchet Handles</li>
</ul>
Overview of the Godox GK50 Multi-Refector Array Grip Kit for KNOWLED LiteFlow
The GK50 Multi-Refector Array Grip is a kit composed of one 39.3&#8243; long extension rod and six smaller ones designed for use with KNOWLED Liteflow. It features four adjustable arms, single and dual knob gags and clamps to easily and precisly position and advjust your set up.
&nbsp;
In the Box
<ul>
<li>Godox GK50 Multi-Refector Array Grip Kit for KNOWLED LiteFlow</li>
<li>4 x Extension Rod (9.8&#8243;)</li>
<li>2 x Extension Rod (29.5&#8243;)</li>
<li>Extension Rod (39.3&#8243;)</li>
<li>4 x Ball Joint Arm</li>
<li>4 x Single Knob Gag</li>
<li>2 x Dual Knob Gag</li>
<li>4 x Clamp</li>
</ul>

Godox GK50 Multi-Refector Array Grip Kit for KNOWLED LiteFlow

Godox GF14 Fresnel Lens for KNOWLED MG1200Bi light
Product Highlights
For use with KNOWLED MG1200Bi Bi-Color LED light
Overview of the GF14 Fresnel Lens
The Godox GF14 Fresnel Lens is made to fit onto the KNOWLED MG1200Bi Bi-Color LED light and works by increasing the light&#8217;s output to 78,800 at 3m.
&nbsp;
In the Box
Godox GF14 Fresnel Lens

Godox GF14 Fresnel Lens for KNOWLED MG1200Bi light

Godox FT-DP800II 1000Ws Replacement Bare Bulb for DP800II and DP1000II Lights
Product Highlights
Replacement or Spare Bulb
Power: 1000Ws
Color Temperature: 5600K (±200K)
User Replaceable
Overview
This Flash Tube from Godox is a replacement or spare tube for the DP800II and DP1000II flash strobes. It is balanced for daylight, featuring a color temperature of 5600K (±200K), and is capable of outputting up to 1000Ws when set to full power. This bulb is easy to install and remove on the flash by the user with no additional tools.
&nbsp;
In the Box
1 x Godox FT-DP800II Flash Tube

Godox FT-DP800II 1000Ws Replacement Bare Bulb for DP800II and DP1000II Lights

Godox FT-AD600 600WS Replacement bare bulb ad600bm
FEATURES
* 600W Flash Tube
* Dedicated Flash Tube for Godox Witstro AD600
&nbsp;
Package Content:
1* Godox AD-FT600 Flash Tube

Godox FT-AD600 600WS Replacement bare bulb ad600bm

Godox FT AD600Pro Replacement Flash Tube
Product Highlights
Replacement or Spare Bulb
Power: 600Ws
Color Temperature: 5600K (±200K)
Overview
This Flash Tube from Godox is a replacement or spare tube for the AD600Pro Witstro outdoor flash. It is balanced for daylight, featuring a color temperature of 5600K (±200K), and is capable of outputting up to 600Ws when set to full power. With a 4-pin connection, it can be easily removed or installed by the user with no additional tools.
&nbsp;
In the Box
1 x Godox Flash Tube for AD600Pro Flash

Godox FT AD600Pro Replacement Flash Tube

Godox FT 16 Wireless Controller Strobe Trigger
Product Highlights
Wireless control: Power on/off, power level, modeling light on/off, buzzer on/off, and flash triggering wirelessly up to a distance of 50m
Remote power adjustment: Each flash group can be set to 16 different levels
Flash grouping: Up to 16 groups can be triggered
One-for-Multiple: Flexible combinations of one transmitter with multiple receivers
LCD display: This ensures easy usage of the trigger
Overview
This wireless flash trigger from Godox supports 16 selectable flash groups. It can be fired wirelessly with a distance range of up to 50m. With sensitive reactions and stable signal transmission, it applies to studio flashes with the wireless port as well as specific camera flashes. It provides you portable and good functional agility, professional and reliable shooting solution.
&nbsp;
Included in the package
1 * Transmitter
1 * Receiver
NB: (Strobe not included)

Godox FT 16 Wireless Controller Strobe Trigger

Godox FLS10 Fresnel Lens Attachment for M600D
Product Highlights
Meant for use with Knowled M600D Daylight
Overview
The Godox Fresnel FLS10 is an ergonomic and sturdy fresnel light meant for use with Knowled M600D Daylight in order to reduce light leaks and rugged durability.It maximises the maximum output of the light to 46,400 lux at 3m allowing you to steplessly adjust the beam angle between 10 degrees spot and 35 degrees flood.
&nbsp;
In the box
Godox FLS10 Fresnel Lens
Carry Bag

Godox FLS10 Fresnel Lens Attachment for M600D

Godox DT-01 Portable Changing/Dressing Tent with Carrying Case &#8211; Black
Product Highlights
<ul>
<li>39.4 x 35.4 x 76&#8243; open-top booth</li>
<li>For changing outfits in private</li>
<li>Zippered panel works as entrance</li>
<li>Collapsible design for easy transport</li>
<li>Carrying bag included</li>
</ul>
Overview of the Godox DT-01 Changing Tent
Get some privacy when shooting on location with this Portable Tent from Godox. The tent is 76&#8243; tall, open at the top and is made of opaque gray material giving your subject an enclosed space in which they can switch outfits or fix their makeup away from public scrutiny. A single zippered panel allows you to enter the tent, which collapses down to approximately 24&#8243; in diameter when not in use. Included with the product is a carrying bag for easy and safe transport.
&nbsp;
In the Package
Godox Portable Tent
Carrying Bag

Godox DT-01 Portable Changing/Dressing Tent with Carrying Case - Black

Godox DB-02 Cable Y Adapter
Features:
Cable Y adapter 2 to 1 for PROPAC Power Pack PB960 speedlite AD360 AD180.
Using a two-in-one Y adapter and a power cable, a flash will largely accelerate in recycling.
The flash will reduce its recycling time in half after use the Y adapter.
This fits for most photographers&#8217; demand of fast recycling.
&nbsp;
Specifications:
Type: DB-02 Cable Y
Color: Black
Package size: 22 * 11 * 4cm / 8.7 * 4.3 * 1.6in
Package weight: 104g / 3.66oz
&nbsp;
Package List:
1 * DB-2 Y Cable
&nbsp;
Note:
This item only includes the D8-2 Y Cable.

Godox DB-02 Cable Y Adapter

Godox DB-01 One-to-two Cable Y Adapter
Features:
Design for Godox PROPAC power pack.
Using a one-to-two Y adapter and power cables,the power pack can provide energy to multiple flashes at the same time.
Great convenience and flexibility!
This fits for most photographers&#8217; demand of fast recycling.
&nbsp;
Specifications:
Type: DB-01 Cable Y
Color: Black
Package size: 23 * 12.5 * 4cm / 9.1 * 4.9 * 1.6in
Package weight: 90g / 3.19oz
&nbsp;
Package List:
1 * Cable
&nbsp;
Note:
This item only includes the Cable.

Godox DB-01 One-to-two Cable Y Adapter

Godox CX Power Cable for Canon Speedlites and PB820/PB960 Flash Power Packs
Product Highlights
Type: CX Power Cable
Fits Canon speedlights
Suitable for use with PB960 and PB820 flash battery packs
Cable length: 50cm (not extended), it can extend up to 1.5m
Color: Black
Overview
This is a power cable from Godox that allows tou to connect your Canon speedlite(s) to the PB960/PB820 external power supply pack. It is easy to use, with only two terminals, and is suitable for use with PB960 and PB820 flash battery packs. The cable is made up of high quality material that is also abrasion resistant and has high insulation. It fits 600EX, 550EX, 580EX II, 430EZ, 540EZ, 550EX Canon speedlites and other flash models (Godox, Yongnuo and the likes) with same type of input power port.
&nbsp;
Note: This CX Cable can only work with the PB960/PB820/PB820S power packs, so please make sure you have either of the power packs before you place an order.
&nbsp;
In the box
1 x CX Cable
1 x User Manual (English)

Godox CX Power Cable for Canon Speedlites and PB820/PB960 Flash Power Packs

Godox BD-07 Barn door grid and gels set for AD200
Overview
To achieve better light effects and shooting experience, you can choose the BD-07 barn door with color gels kit, that is dedicated for use with Godox AD200. It includes 4 color filters (yellow, green, red and blue), a barndoor kit and a honeycomb grid.
&nbsp;
In the Box
1 &#8211; Barn door
4 &#8211; Color filters
1 &#8211; Honeycomb grid

Godox BD-07 Barn door grid and gels set for AD200

Godox BD-04 Barndoor Kit with 4 Color Gels and Honeycomb for Strobe
Highlights
<ul>
<li>Fits Standard 7&#8243; Reflector</li>
<li>Four-Leaf Barndoor</li>
<li>Honeycomb Grid</li>
<li>Yellow, Green, Blue, and Red Filters</li>
</ul>
Overview
The Godox BD-04 Barndoor Kit with 4 Color Gels and Honeycomb is a strobe light modifying accessory that is designed to fit on the front of a standard 7&#8243; reflector. Included in the kit is a four-leaf barndoor set for adjusting the shape of the light output; a honeycomb grid for producing a harder quality of light and a tighter beam; and red, green, yellow, and blue gel filters for producing a dramatic and creative wash of color.
&nbsp;
Included in the box
<ul>
<li>Godox Barndoor Kit</li>
<li>Honeycomb Grid</li>
<li>4 x Color Filter (blue, red, yellow &amp; green)</li>
</ul>

Godox BD-04 Barndoor Kit with 4 Color Gels and Honeycomb for Strobe

Godox Barndoors for FLS10 Lens
Meant for use with Godox FLS10 Fresnel Lens
&nbsp;
Shape and control direction of light
&nbsp;
Prevents Light spills
&nbsp;
8-Leaf Barndoor Design
&nbsp;
Designed for use with Godox FLS10 Fesnel Lens which allow you to shape and control the direction and spread of the light beam. It can also be used to cut the beam so as light falls on a particuar spot.
&nbsp;
&nbsp;
Godox Barndoors for FLS10 Fresnel Lens

Godox Barndoors for FLS10 Lens

Godox AK-R21 Projection Attachment Kit for Round-Head Flashes
Overview of the Godox AK-R21 Projection Attachment Kit
The AK-R21 Projection from Godox is an attachment modifier for use with round-head flash lights. This kit allows for the creation of creative lighting effects onto your subject with Godox creative effect projection slides.
&nbsp;
The AK-R21 is also compatible with most Godox flashes with square heads when used in conjunction with the AK-R25 or the S-R1 square flash head adapter holder.
&nbsp;
In the Box
<ul>
<li>Godox AK-R21 projection attachment</li>
<li>Godox 65mm Lens for AK-R21</li>
<li>Adapter for Round Flash Head</li>
<li>Slide Box</li>
<li>Godox Logo Slide</li>
<li>Demo Slide</li>
<li>Pouch Bag</li>
</ul>

Godox AK-R21 Projection Attachment Kit for Round-Head Flashes

Godox AK-R1 Accessory Kit for Round Head speedlites and H200R
Godox AK-R1 Accessory Kit for H200R / V1 contains magnetically-attached modifiers that maximize the capabilities of the head.
&nbsp;
The kit contains a snoot, four-way barndoors, and a honeycomb grid to narrow the light&#8217;s beam and selectively light your subject. Conversely, a near-180-degree dome, a wide lens, and a bounce card with a frame are provided to expand the beam. Finally, a filter set with three amber CT filters and one green fluorescent filter are also included.
&nbsp;
Magnetic accessories for simple and fast installation while also capable of being stacked on top of each other as needed.
&nbsp;
Key features of the AK-R1
A comprehensive collection of light modifiers for the AD200 Round Head and Godox V1 round head speedlite
Add drama, control, and selectivity
Modifiers stack magnetically for an endless combination of effects
Powerful rare earth element magnets firmly grasp
Filters constructed of durable hard plastic
An instantaneous solution for every imaginable situation
Stack-able system for creative combinations
Included in the package
<ul>
<li>Diffuser Dome</li>
<li>Snoot</li>
<li>6pcs Gel Set</li>
<li>Honeycomb Grid</li>
<li>Four-Way Barn door Set</li>
<li>Wide Lens</li>
<li>Bounce Card with Frame</li>
<li>Portable Bag</li>
</ul>

Godox AK-R1 Accessory Kit for Round Head speedlites and H200R

Godox ADS200 Stick Flash Head
Product Highlights
<ul>
<li>For AD200/AD200Pro Pocket Flashes</li>
<li>200Ws, 5600K Color Temperature</li>
<li>Throws a 360° Beam Spread</li>
<li>Unique Cylindrical-Like Design</li>
<li>Soft, Even Light Quality</li>
<li>Compact and Portable, Fits Tight Spaces</li>
<li>Includes Barndoors</li>
<li>Includes Carry Bag</li>
</ul>
Overview of the Godox ADS200 Stick Flash Head
Introducing the Godox ADS200 Stick Flash Head for use with the Godox AD200 series. This is an extension flash system of the AD200/AD200Pro pocket flashes that is able to spread light in a 360° angle and light up a shooting space quite well. Being cylindrical in shape, this stick flash produces light that can wrap around your subject evenly without the need of an additional modifier.
&nbsp;
It is easy to handle and can fit into tight spaces such as in cars, dressing rooms, etc. It is 64cm long with barndoors that allow for control of light spillage of light from 180° to various narrower angles. The AD-S200 maintains a consistent color temperature throughout its power range as it draws power from the AD200/AD200Pro flashes. Finally, the handle is made comfortable for handheld shoots and has a 1/4&#8243; thread at the bottom for mounting on a light stand.
&nbsp;
In the Box
<ul>
<li>Godox ADS200 Stick Flash Head</li>
<li>Barndoors</li>
<li>Carry Bag</li>
</ul>

Godox ADS200 Stick Flash Head

Godox AD-S2 4.7&#8243; Standard Reflector for AD200 and AD360 Bare-Bulb Flash Heads
Product Overview
This standard reflector from Godox is 4.7&#8243; in size and designed for the Godox AD200 as well as AD360 bare-bulb flash heads. It can also be combined with optional color gels (NOT included) to give color to your background.
&nbsp;
Specifications
Material: Aluminum
Size: 11.9cm
Weight: 20g

Godox AD-S2 4.7" Standard Reflector for AD200 and AD360 Bare-Bulb Flash Heads

Godox AD-S15 Flash Lamp Tube Bulb Protector Cover
Features:
The cover is especially used for WITSTRO Advanced Flash AD180/AD200/AD360.
Easy to install on the flash light and protect it from direct and accidental collision.
Convenient for light carrying and transportation.
&nbsp;
Specifications:
Diameter 3.8cm / 1.6in
Height: 8.4cm / 3.3in
Material: Aluminum alloy
Weight: 32g / 1.11oz
&nbsp;
Package List:
1 * Bulb Protector Cover

Godox AD-S15 Flash Lamp Tube Bulb Protector Cover

Godox AD-R6 Standard Reflector Dish for Bowens Mount
Highlights
<ul>
<li>Standard Reflector Diameter: 7&#8243;/18cm</li>
<li>Depth: 5&#8243;/12.8cm</li>
<li>Mount: Bowens Mount</li>
<li>Material: Metal</li>
<li>Weight: 160g</li>
</ul>
Product Overview
This Godox AD-R6 standard reflector is designed for standard studio strobe flash use especially with Godox AD600B and AD600BM. The reflector directs all the strobe light output onto the set. It is an all metal construction for durability.
&nbsp;
Included in the Package
1 x Godox AD-R6 Standard Reflector Bowens Mount

Godox AD-R6 Standard Reflector Dish for Bowens Mount

Godox AD-H600B Portable 600W Flash Extension Head with Bowens Mount for AD600B and AD600BM
Product Highlights
<ul>
<li>Connects AD600 Battery Powered Head</li>
<li>Total of 600Ws</li>
<li>Godox AD-H600B Overview</li>
</ul>
Designed to be handheld, the AD-H600B Portable 600Ws Extension Head with Bowens MountfromGodoxis a flash head with a tilting receiver and a Bowens front accessory mount. The AD-H600B allows attachment of one battery-powered AD600 flash head.
&nbsp;
Note: The flash tube for the head is purchased separately.
&nbsp;
In the Package
1 x Godox AD-H600 600W Flash Light Lamp Head

Godox AD-H600B Portable 600W Flash Extension Head with Bowens Mount for AD600B and AD600BM

Godox AD-CS Bowens Mount Adapter Fixed Locking Ring for AD600 flash series using AD-H600B and AD-H1200B Flash Heads
The AD-CS Locking Ring from Godox is a Bowens Mount Fixed adapter that is designed to fit onto the Godox AD600B and AD600BM flash strobes for one to lock the Godox AD-H600B and AD-H1200B flash heads plugs into the flash. The ring itself locks into the Bowens mount and acts as a safety/security feature for your setup.
&nbsp;
The locking ring is made of high quailty PVC plastic material.
&nbsp;
In the Package
1 x Godox AD-CS Fixed Ring Adapter

Godox AD-CS Bowens Mount Adapter Fixed Locking Ring for AD600 flash series using AD-H600B and AD-H1200B Flash Heads

Godox AD S17 Soft Focus Shade Diffuser for ad200
This wide angle soft focus shade diffuser can soften the direct light from flashlight to soft diffused light. Eliminating the flare of portrait and other objects obtains a picture of softer and more natural. 180° effective area, hemispherical compensation, soft and uniform light, embody brightness and textures, especially suitable for lighting in small space and reflective objects.
Features:
&#8211; Wide angle diffuser can soften the direct light from flashlight to soft diffused light.
&#8211; Eliminating the flare of portrait and other objects obtains a picture of softer and more natural.
&#8211; 180 degree effective area, hemispherical compensation, soft and uniform brightness and textures.
&#8211; Suitable for lighting in small space and reflective objects.
Specification:
Effective area: 180°
Color: White
Diameter: 12cm / 4.7in
Suit for Speedlite AD180 AD360
Weight: 90g
Contains:
1— Godox AD-S17 Soft Focus Shade Diffuser

Godox AD S17 Soft Focus Shade Diffuser for ad200

Godox AC Adapter for AD400Pro Outdoor Strobe AC400
Power your Godox AD400Pro Monostrobe directly from the electrical network without additional converters and inverters using the Godox AD400Pro AC adapter to shoot for longer reducing the risk of the battery running out. The adapter features a fan and a mechanism to protect against damage due to overheating. It is easy to assemble as you just plug the AC adapter on the back of the AD400Pro to start using immediately.

Godox AC Adapter for AD400Pro Outdoor Strobe AC400

Godox 7 Inch reflector Diffuser for ADR6 AD600BM
Translucent soft disc to fit 7&#8243; standard reflectors

Godox 7 Inch reflector Diffuser for ADR6 AD600BM

Godox 300Ws Replacement Bulb for AD300Pro (FT-AD300)
Product Highlights
300ws
5600K
Easy to change
2-Pin Omega-Shaped
Overview
This flashtube from Godox is designed for the AD300Pro strobe. It has a 5600k light source and 3000Ws. This flashtube gives you 100,000-250,000 flashes. It also comes with a vented glass tube protecting th element from oil, dirt and impact.
&nbsp;
Included in the box
1*Godox Bulb for AD300Pro

Godox 300Ws Replacement Bulb for AD300Pro (FT-AD300)

Godox 19° Lens for VSA Spotlight Attachment
Product Highlights
For use with Godox VSA spotlight attachment
Produces a 19° light beam angle
Overview of the Godox 19° Lens for Spotlight Attachment
This is a 19° lens for spotlight attachement from Godox for a narrow beam spread. It is quick to swap with other available lenses for your Godox VSA spotlight mount for more options in your lighting setup.
&nbsp;
In the Box
Godox 19° Lens for spotlight attachment

Godox 19° Lens for VSA Spotlight Attachment

Gary Fong Color Reference Kit
Overview
Gary Fong Color Reference Kit offers photographers an affordable complete color control system. It includes a WhiteDome, the GrayDome, an intuitive pocket field guide, and a convenient lanyard to keep everything together. Using reflective metering, photographers shoot the GrayDome in the scene or with the subject holding it, which captures and measures the color of the light reflected off the dome. That frame then becomes the benchmark reference for all images photographed under those lighting conditions from which a custom white balance can be set during post-processing. The White and Grey Dome are spherical, gauging all types of light from all directions.
&nbsp;
In the Box
<ul>
<li>1 x WhiteDome</li>
<li>1 x GrayDome</li>
<li>1 x Handy Strap</li>
</ul>

Gary Fong Color Reference Kit

Flash Diffuser Bounce Softbox Cap
<ul>
<li>Gives your pictures a softer effect</li>
<li>Softens harsh shadows, reduce hot spots</li>
<li>Can be attach in seconds</li>
<li>Lightweight, so easy to carry anywhere</li>
</ul>

Flash Diffuser Bounce Softbox Cap

Feelworld TP2 Portable Teleprompter for Smartphones, Tablets &amp; DSLR Cameras
Product Highlights
<ul>
<li>Tablet/smartphone clamp support size: Below 8&#8243; for smartphone/tablet</li>
<li>Shooting Focal Length: No less than 35mm</li>
<li>System Supporting: Android, iOS</li>
<li>Control Way: APP, Bluetooth remote control</li>
</ul>
Overview
The TP2 teleprompter from FEELWORLD is a useful auxiliary equipment in such applications as in live broadcast for efficiency and professionalism. This teleprompter can be used with a tablet or smart phone as a DSLR/mirrorless camera is recording the presentation, allowing the video shooter to read scrolling text clearly as they look directly into the camera.
&nbsp;
The TP2 teleprompter is made of environmentally-friendly ABS industrial plastic material, which is lightweight, sturdy and durable. It&#8217;s compact design makes it portable and suitable for quick setup. With a 1/4 inch standard size mounting hole at the bottom, this teleprompter can be mounted onto tripods and light stands with a 1/4 inch male thread. It supports wide angle lenses, hence, there is no vignetting during recording, and it can be controlled using an included bluetooth remote controller or Android/iOS app. Also included with the package are eight adapter rings, 49/52/55/58/62/67/72/77mm in size, for the adaptability of different sizes of lenses.
&nbsp;
How to install and disassemble a smartphone or tablet
The TP2 teleprompter is able to support the installation of below 20cm/8 inch gadgets. It is equipped with a tablet/smartphone clamp which you need to install onto the teleprompter body with the side that is suitable with the gadget to be used, that is, smartphone or tablet. Then push the &#8220;PUSH&#8221; lock on the left to fasten the clamp. To disassemble, push the &#8220;PUSH&#8221; lock on the right to remove the clamp.
&nbsp;
Specifications
<ul>
<li>Main Material: ABS</li>
<li>Unit Size: 205x97x171mm</li>
<li>Unit Weight: 300g</li>
<li>Color Box Size: 217L*177W*122H(mm)</li>
<li>In the box</li>
<li>1 x Feelworld TP2 Teleprompter</li>
<li>1 x Tablet/smartphone clamp</li>
<li>1 x Remote controller</li>
<li>8 x Lens adapters (77/72/67/62/58/55/52/49mm)</li>
<li>1 x Drawstring bag</li>
<li>1 x Microfiber cloth</li>
<li>1 x Manual</li>
</ul>

Feelworld TP2 Portable Teleprompter for Smartphones, Tablets & DSLR Cameras

FEELWORLD TP16 16&#8243; Portable Teleprompter for Tablets &amp; DSLR Cameras
Product Highlights
<ul>
<li>Foldable unit for easy storage</li>
<li>Supports tablets up to 16&#8243;</li>
<li>Made of 70/30 beamsplitter glass</li>
<li>Includes a sun hood with drawstring</li>
<li>Allows for vertical and horizontal shooting</li>
<li>2 to 3&#8243; height adjustment</li>
<li>Use with an iOS/Android prompting app</li>
<li>Bluetooth remote control (included)</li>
<li>Extension clamp with cold shoe mounts</li>
</ul>
Overview of the FeelWorld TP16 Teleprompter
Use FeelWorld TP16 Folding Teleprompter to record scripted content with your camera, camcorder, or PTZ whether for livestream, presentations, or interviews. This teleprompter makes use of a tablet (upto16 inches in size) held by the included clamp to enable you read prepared material. It comes with a 70/30 beamsplitter glass that sits at a 135° angle for maximum visibility. Additionally, the included drawstring sun hood accommodates a large range of lenses including wide-angle lenses like 24mm and longer.
&nbsp;
Using the Bluetooth remote control with the FeelWorld iOS/Android compatible app ,you will have control over your script. You can adjust your script speed, select files, and play/pause from up to 100m away. Use the included extension clamps and their built-in cold shoe mounts to attach fill lights or microphones to each side of your prompter. Finally, everything folds down into a compact form and fits into a carrying case for transport and storage.
&nbsp;
In the Box
<ul>
<li>FeelWorld TP16 70/30 beam splitter glass</li>
<li>Remote control</li>
<li>Sun hood</li>
<li>2 x extension clamp</li>
<li>7 x 1/4&#8243; screw</li>
<li>Microfiber cloth</li>
<li>Carrying case</li>
</ul>

FEELWORLD TP16 16" Portable Teleprompter for Tablets & DSLR Cameras

FeelWorld TP13A (13&#8243;) Portable Teleprompter for Smartphones/Tablets/DSLRs
FeelWorld TP13A Teleprompter Highlights
<ul>
<li>Supports both tablet and smartphone prompting</li>
<li>Supports tablets up to 11&#8243;</li>
<li>Wide-angle shooting</li>
<li>Has a removable sun visor</li>
<li>HD script mapping</li>
<li>Operated via the feelworld prompting app</li>
<li>Allows for DSLR or DSLM recordings</li>
</ul>
Overview of the FeelWorld TP13A Teleprompter
This is a 13-inch teleprompter from Feelworld known as TP13A for use with smartphones or tablets (supports tablets up to 11&#8243;) and allows for recording with phones as well as cameras. To facilitate for contolled lighting, this comes with a sun visor or removable fabric to minimize the amount of stray lighting falling into the camera&#8217;s lens when recording. There is also a Bluetooth remote included that enables for communication with the Feelworld iOS/Android app.
&nbsp;
To record using a smartphone, the TP13A is equipped with a magnetic affix for easy horizontal or vertical shooting. It also adopts the use of a lifting mount to allow for installation of a shooting device at a raised point.
&nbsp;
TP13A supports not less than 24mm focal length for smartphone/tablet prompting and more than 35mm focal length for smartphone/DSLR shooting.
&nbsp;
In the Box
<ul>
<li>Feelworld TP13A Teleprompter</li>
<li>4 x Foam rings</li>
<li>Magnetic smartphone clamp</li>
<li>Tablet/smartphone clamp</li>
<li>Bluetooth Remote Controller</li>
<li>Microfiber cloth</li>
</ul>

FeelWorld TP13A (13") Portable Teleprompter for Smartphones/Tablets/DSLRs

FeelWorld L4 HDMI Livestream Switcher with 10.1&#8243; LCD Monitor
Product Highlights
<ul>
<li>5-Input Video Production Switcher</li>
<li>1 x SDI (BNC) &amp; 4 x HDMI Inputs</li>
<li>SDI &amp; HDMI Outputs, USB 3.0 to Computer</li>
<li>Built-In 10.1&#8243; LCD Touchscreen Display</li>
<li>Livestream via Computer &amp; Software</li>
<li>Supports up to 1080p60 Video In/Out</li>
<li>3.5mm Audio In &amp; Out, 2-Ch Audio Mixing</li>
<li>Chroma Keying &amp; Logo Overlays</li>
<li>Configurable PiP/13 x Transition Effects</li>
<li>Aluminum Housing with Built-In Fan</li>
</ul>
Overview of FeelWorld L4 HDMI Livestream Switcher with 10.1&#8243; LCD Monitor
The new Feelworld L4 is a livestream switcher that takes up to four HDMI and one SDI video sources and features a built-in 10.1&#8243; touchscreen display to stream up to 1080p60 video via USB 3.0 using your computer and third-party streaming software.
&nbsp;
In the Package
<ul>
<li>FeelWorld L4 HDMI Livestream Switcher with 10.1&#8243; LCD Monitor</li>
</ul>
Power Adapter
USB Cable

FeelWorld L4 HDMI Livestream Switcher with 10.1" LCD Monitor

Feelworld FW703 7 inch Camera Field Monitor with HDMI and SDI
Product Highlights
<ul>
<li>3G-SDI 4K HDMI camera field monitor</li>
<li>7 inch IPS screen</li>
<li>Full HD 1920&#215;1200 high resolution</li>
<li>High brightness: 450cd/m2</li>
<li>High Contrast: 1200:1</li>
<li>Aspect Ratio 16:10</li>
<li>Backlight: LED</li>
<li>Viewing angle: 80°/80°(L/R) 80°/80°(U/D)</li>
</ul>
Overview
FW703 7 inch Field Monitor from Feelworld is a 3G-SDI 4K HDMI professional camera monitor with Full HD 1920 x 1200 resolution, 323 ppi density, high brightness, high contrast and a wide viewing angle (160°) that allows for multiple members of the crew to watch the screen at the same time. It&#8217;s small size makes it portable. It is lightweight too at 320g with an ultra-thin design of 0.87 inch thickness; easy to hold in your hands. The monitor has a color calibration technology and Rec.709 HD professional color standard. This makes it possible to achieve monitor calibration efficiently and get accurate color reproduction easily without distorting color and showing the real pictures on a shoot. Other features that a user acquires include peaking, zoom, anamorphic mode, markers, and image flip. It is suitably designed for film making and video shooting.
&nbsp;
Compatible Batteries
Sony F530, F550, F570, F730, F750, F770, F930, F950, F960, F970, QM91D, QM91, QM90D, QM90, QM71D, QM71, QM70D, QM70, QM51D, QM51, FM71, FM70 series.
&nbsp;
Note: (Battery is bought separately)
&nbsp;
Specifications
Input Output
1 x BNC3G-SDI 1 x BNC3G-SDI
&nbsp;
1 x HDMIHDMI 1 X HDMIHDMI
&nbsp;
Audio
&#8211; AudioStereo Headphone, Speaker
&nbsp;
SDI Format
&#8211; 480i/576i
&nbsp;
&#8211; 720p (60/59.94/50/30/29/25/24/23.98)
&nbsp;
&#8211; 1080i (60/59.94/50)
&nbsp;
&#8211; 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
&nbsp;
HDMI Input/ Output Format
&#8211; 480i/576i/480p/576p
&nbsp;
&#8211; 1080i (60/59.94/50)
&nbsp;
&#8211; 720p (60/59.94/50/30/29/25/24/23.98)
&nbsp;
&#8211; 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)
&nbsp;
&#8211; 4K UHD 3840×2160p (30/29.97/25/24/23.98Hz), 4096×2160p (24Hz)
&nbsp;
Install Way: 1/4&#8243;-20 Thread Socket (bottom)
Input Voltage: DC6.5～24V
Power Consumption: ≤9W
Included in the package
<ul>
<li>1 x Feelworld FW703 Monitor</li>
<li>1 × Mini HDMI Cable</li>
<li>1 × Sunshade</li>
<li>1 × Hot Shoe Mount</li>
<li>1 × F970 Battery Plate (Note: battery not included)</li>
<li>1 × User&#8217;s Manual</li>
</ul>

Feelworld FW703 7 inch Camera Field Monitor with HDMI and SDI

Feelworld F6 5.7inch Full HD On-Camera Monitor with 4K HDMI Support and Tilt Arm
Product Highlights
<ul>
<li>HDMI 4K Input</li>
<li>Contrast: 1400:1</li>
<li>Maximum Brightness: 460 cd/m²</li>
<li>Rec. 709 HD Color calibration</li>
<li>1920 x 1080 Native Resolution</li>
</ul>
Overview
The Feelworld 5.7 inch on-camera field monitor is a Full HD HDMI monitor with a tilt arm and 4K support as well as 1920&#215;1080 resolution. With a maximum brightness of 460 cd/m² and contrast of 1400:1, this IPS monitor enables the user to monitor their camera&#8217;s output. It ensures accurate color reproduction with the calibrated Rec. 709 HD color standard feature. It is easy to have a number of crew members watch the monitor at the same time as this monitor has a wide viewing angle of 170°.
&nbsp;
The monitor lacks front-panel buttons and knobs that tend to clutter the device. Instead, it&#8217;s top has control buttons to provide it&#8217;s users with maximum screen size to view your footage. An assortment of diagnostic and display tools are included in this monitor. They include: histogram, focus peaking, false color, image flip, zebra color, and color temperature adjustment. In addition, the monitor supports aspect ratio display and features an anamorphic mode that supports 1.33:1 and 2.0:1.
&nbsp;
Features
<ul>
<li>Histogram</li>
<li>Image Freeze</li>
<li>Image Flip (H, V, H/V)</li>
<li>False Colors</li>
<li>Peaking Focus Assist (red, green, blue)</li>
<li>Zebra Exposure (1%~100% adjustable)</li>
<li>Zoom (4x, 9x, 16x)</li>
<li>Zoom-all</li>
<li>U/D and L/R zoom</li>
<li>Pixel to Pixel</li>
<li>Anamorphic Mode (1.3x, 2.0x, 2.0x mag)</li>
<li>Center Marker</li>
<li>Ratio Marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1)</li>
<li>Marker Color (red, green, blue, white, black)</li>
<li>Check Field (red, green, blue, mono)</li>
<li>Color Temperature Adjustment/ Earphone output</li>
<li>Nine-grid</li>
<li>Rec.709 Color calibration</li>
<li>Focus Assist (Red, Green, Blue)</li>
<li>Camera Mode</li>
</ul>
Included in the package
<ul>
<li>1 x FeelWorld 5.7&#8243; On-Camera Monitor with 4K Support</li>
<li>1 x Sunshade</li>
<li>1 x Sunshade Mounting Frame</li>
<li>1 x HDMI Cable</li>
<li>1 x Tilt Arm</li>
<li>User&#8217;s Manual</li>
</ul>

Feelworld F6 5.7inch Full HD On-Camera Monitor with 4K HDMI Support and Tilt Arm

FeelWorld F5 Pro X 5.5&#8243; High-Brightness 4K HDMI Touchscreen Field Monitor
Product Highlights
<ul>
<li>Screen Size: 5.5&#8243; IPS</li>
<li>Resolution: 1920 x 1080 pixels</li>
<li>Aspect ratio: 16:9</li>
<li>Brightness: 1600cd/m²</li>
<li>Contrast: 1000:1</li>
<li>3D LUTs, Histogram, Vectorscope &amp; More</li>
<li>Input and loop output supports up to DCI 4K</li>
<li>HDMI Input and Output ports</li>
<li>DC &amp; USB-C Power Inputs | DC Output</li>
<li>L-Series Battery Plate</li>
<li>Rear Bracket for Attaching Transmitters</li>
</ul>
Overview of the FeelWorld F5 Pro X Monitor
The FeelWorld F5 5&#8243; Full HD HDMI On-Camera Monitor is a lightweight, IPS LCD display supporting up to 4K input and used for video monitoring. With a native 1920 x 1080p resolution, a contrast ratio of 1000:1, an 80° viewing angle, 450 cd/m² brightness and support for up to 4096 x 2160p resolution via its HDMI input and output ports, this monitor is a compact and professional field piece. Advanced monitoring features included in the monitor include zoom, image flip, false colors, zebra, histogram, focus assist and Rec. 709 color calibration for accurate color reproduction.
&nbsp;
With the included tilting arm, the monitor can be mounted on to a stabilizer gimbal or camera shoe mount or it can be mounted using a 1/4&#8243;-20 thread on the side and bottom. For power, the FeelWorld F5 is designed to use a F970 or LP-E6 battery (neither is included) using its built-in, dual-purpose battery mount. When powering the monitor via a battery, the user can power charge their camera using an 8.4 VDC barrel output (sold sepaprately). A micro-HDMI cable to connect your camera and a sun shade to protect the monitor from sunlight are also included.
&nbsp;
Features
<ul>
<li>Histogram</li>
<li>Peaking focus assist (red, green, blue)</li>
<li>False colors</li>
<li>Zebra exposure (1-100 IRE adjustable)</li>
<li>Nine-grid</li>
<li>Camera mode</li>
<li>Zoom (4x, 9x, 16x)</li>
<li>Anamorphic mode (1.3x, 2.0x, 2.0x magnification)</li>
<li>Pixel-to-pixel</li>
<li>Center marker</li>
<li>Underscan and overscan</li>
<li>Safe area (80, 85, 90, 93, and 96%, 2.35:1)</li>
<li>Ratio marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, and 2.35:1)</li>
<li>Marker color (red, green, blue, white, black)</li>
<li>Check field (red/green/blue/mono)</li>
<li>Image flip (H, V, H/V)</li>
<li>Image freeze</li>
<li>Zoom-all</li>
<li>U/D and L/R zoom</li>
<li>Color temperature adjustment</li>
<li>Included in the box</li>
<li>1 x FeelWorld F5 Pro X 5.5&#8243; High-Brightness 4K HDMI Touchscreen Field Monitor</li>
<li>1 x Sun Shade</li>
<li>1 x Tilt Arm</li>
<li>1 x Micro-HDMI Cable</li>
<li>1 x User&#8217;s Manual</li>
</ul>

FeelWorld F5 Pro X 5.5" High-Brightness 4K HDMI Touchscreen Field Monitor

FEELWORLD ATEM156 15.6 Inch Live Streaming Broadcast Director Monitor for ATEM Mini Video Switcher Mixer Pro Studio Television Production with 4 HDMI Input Output Quad Split Display Atem
Product Highlights
<ul>
<li>4 X 4K HDMI Input and Output</li>
<li>Sharper and More Detailed Image</li>
<li>Improve the Shooting Efficiency</li>
<li>Easy Button Operation</li>
</ul>
&nbsp;
Overview
<ul>
<li>ATEM156 has 4 X 4K </li>
</ul>
HDMI input and output, which can connect up to 4 cameras, game consoles, computers and other equipment. At the same time, it can also loop out 4 HDMI signals to other devices, such as ATEM Mini or ATEM Mini Pro. This is very useful for studio and live multi-camera shooting.
&nbsp;
<ul>
<li>Improve the Shooting Efficiency</li>
</ul>
FEELWORLD ATEM156 Equipped with four 4K HDMI inputs, it supports quad view, dual view, and single view monitoring functions, allowing you to get perfect multi-camera monitoring in any location! It contains focus-checking functions, such as Peaking Focus, False Color, and Pixel to Pixel, to assist in getting sharp images.
&nbsp;
<ul>
<li>High resolution</li>
</ul>
The FEELWORLD ATEM156 equipped with a 15.6 inch IPS LCD panel, allows you to have 1920 x 1080 resolution for each pixel in the HDMI input under the PIS LCD panel, with a contrast ratio of 800:1 and a 170° wide viewing angle in the vertical direction.
&nbsp;
<ul>
<li>Easy Button Operation</li>
</ul>
It is equipped with a simple control panel, you can customize the shortcut key functions and quickly call them out. You can use the 12V DC power input and V- mount battery plate to power monitor.
&nbsp;
<ul>
<li>Live Production Broadcast Monitor</li>
</ul>
ATEM156 is an affordable way to create incredible programs immediately from live events! It is very suitable for the use of broadcasters, live sports, concerts, lectures and seminars, eSports and gaming competitions, web broadcasters, and other scenarios. It can meet your indoor and outdoor multi-camera monitoring needs.
&nbsp;
Included in the package
&nbsp;
<ul>
<li>1 ATEM156 Monitor,</li>
<li>1 Mini/ Micro HDMI to HDMI Cable,</li>
<li>1 V-mount Battery Plate,</li>
<li>1 3A 3A Power Adapter,</li>
<li>1 U-shaped Bracket</li>
</ul>

FEELWORLD ATEM156 15.6 Inch Live Streaming Broadcast Director Monitor for ATEM Mini Video Switcher Mixer Pro Studio Television Production with 4 HDMI Input Output Quad Split Display Atem

DJI R Vertical Camera Mount for RS 2 and RS 3 Pro Gimbals
Product Highlights
<ul>
<li>Allows for vertical shoots</li>
<li>Fits and works well with RS 2 and RS 3 Pro gimbals</li>
</ul>
Overview of the DJI R Vertical Gimbal Camera Mount
This vertical mount from DJI for use with gimbals provides one with a portrait camera mounting solution for such shoots as those for social media content creation. Although the RS 2 and RS 3 Pro gimbals already support portrait mode with its standard mounting plate, the vertical mount replaces the existing camera plate to deliver a more reliable solution for longer shoots.
&nbsp;
In the Box
<ul>
<li>DJI R Vertical Camera Mount for RS 2 and RS 3 Pro Gimbals</li>
</ul>

DJI R Vertical Camera Mount for RS 2 and RS 3 Pro Gimbals

Deadcat Wind Muff Microphone Cover
Product Overview
Furry Mic Windscreen Wind Cover Microphone
The Furry Wind Cover is designed to help reduce noise while doing outdoor recording or in adverse environments. It helps you filter the noise to get a clear record, remaining acoustically transparent. It is made of artificial fur to minimize wind noise while remaining acoustically transparent around the main sound source. It has an elastic enclosure that allows you to attach the wind cover firmly to your microphone recorder.
&nbsp;
Specifications:
<ul>
<li>External length: 200mm</li>
<li>Internal depth: 140mm</li>
<li>Interface diameter: 40mm</li>
<li>Interface extender: up to 55mm in circle</li>
<li>In the Package</li>
<li>1 x HUANOR HN-17 Windscreen Muff Cover</li>
</ul>

Deadcat Wind Muff Microphone Cover

Colored Acrylic Slate ClapperBoard
Features
<ul>
<li>Computer-engraved English lettering for longevity</li>
<li>Large-size: 24.5 x 29.8cm</li>
<li>Made of Acrylic material and non-wood, easy to be written on or cleaned</li>
<li>Magnetic sticks ensure firm and audible closure</li>
<li>Special design and powerful enough to avoid crack</li>
</ul>
Overview
This colored acrylic clapper board slate is a film production clapboard that is made of white acrylic and designed to be used with dry erase markers. It is used in sync sound productions, that is film, video and/or with dual-system DSLRs. It comes with standard-size White/Black clapper sticks and has a writing surface of 25x20cm.
&nbsp;
Specifications
<ul>
<li>Material: Magnetic strip + Acrylic</li>
<li>Writing way: Use the high-quality felt pen or marker pen, and erase it after use (pen not included)</li>
<li>Used for: Film, TV plays, studio live, advertisement, video, etc</li>
<li>Clapboard size: Approx. 24.5 * 29.8 * 1.8cm</li>
<li>Clapboard weight: 360g</li>
</ul>
In the box
<ul>
<li>1 x Colored Film Clapboard</li>
</ul>

Colored Acrylic Slate ClapperBoard

Coldshoe to 1/4 inch Mount Adapter with Double Locking Nuts
Highlights
<ul>
<li>Standard shoe mount compatible</li>
<li>1/4 inch thread screw</li>
<li>25mm x 25mm coldshoe</li>
<li>Material: Alluminium alloy</li>
</ul>
Overview
&nbsp;
This cold shoe adapter has a standard shoe mount which allows you to attach microphones, flash, LEDs, and other accessories taht are compatible. It comes with two secure bending levels on one end to prevent accidental slidings during removal. It is secured tightly via the two M2.5 screws and a 1/4&#8243;thread hole for you to attach the camera cage. It also has indicators (two white arrows) on the surface to show the mounting ways for your convenience.
&nbsp;
In the Box
&nbsp;
<ul>
<li>2 x M2.5 screws</li>
<li>2 x Hex spanner</li>
<li>1 x 1/4&#8243;-20 screws</li>
<li>1 x coldshoe</li>
</ul>

Coldshoe to 1/4 inch Mount Adapter with Double Locking Nuts

Canon RS-60E3 Remote Shutter Switch
Product Highlights
<ul>
<li>Simple plug-in attachment</li>
<li>Replicates all shutter release button functions</li>
<li>Cable is 2ft/60cm long</li>
</ul>
Overview
This a separately available Canon camera accessory for use to control a camera remotely. It&#8217;s function is to replicate the functions of a camera&#8217;s shutter release button. Mainly preffered to minimize vibration for close-ups or when taking photos of subjects that are hard to approach. It is connected to the camera via it&#8217;s remote control terminal then the user can press the shutter button halfway or completely to take a photo. The attaching cord is 60cm long (2 feet) thus allowing the user plenty of space to use the remote away from the camera.
&nbsp;
Compatible with Canon PowerShot G1X, G1X Mark III, G3X, G5X, G5X Mark II, G10, G11, G12, G16, EOS Digital Rebel series, 60D, 60Da, 70D, 77D, 80D, 90D, Elan II/IIE, Elan 7/7E, Rebel Ti/2000/G/GII/X/XS, IX/IX Lite, SX50 HS, SX70 HS, EOS Rebel T1i, T2, T2i, T3, T3i, T4i, T5, T5i, T6, T6s, T6i, T7, T7i, SL1, SL2, SL3, and EOS M5, M6, M6 Mark II, M100, R, RP
&nbsp;
In the Box
<ul>
<li>1 x Canon RS-60E3 Remote Shutter Switch</li>
<li>Manual</li>
</ul>

Canon RS-60E3 Remote Shutter Switch

Canon AD-E1 Multi-Function Shoe Adapter
Product Highlights
<ul>
<li>Locking Shoe Design</li>
<li>Adapt Shoe Accs. to Multi-Function Shoe</li>
<li>Maintains Weather Sealing</li>
</ul>
Overview
The AD-E1 Multi-Function Shoe Adapter helps transition cameras featuring a Multi-Function Shoe adapt legacy speedlight accessories. It also comes with an all weather-sealed design which gives you a secure connection to your updated shoe type. The Canon AD-E1 multi-function shoe adapter enables you to use speedlights on the Canon EOS R50.
&nbsp;
In the box
<ul>
<li>Canon AD-E1 Multi-Function Shoe Adapter</li>
<li>Shoe Cap</li>
</ul>

SUPERFIRE L20 Large Capacity Flashlight

Product Description

Similar Products

SUPERFIRE A36 12W EDC Bright LED Flashlight 2000mAh Battery 780LM Torc...

Ksh1,027

SUPERFIRE L25 High Power Flashlight

Ksh1,218

Godox XTR-16 Wireless Power-Control Flash Trigger Receiver

Ksh1,620

Godox XT32C Wireless Power-Control Flash Trigger for Canon Cameras

Ksh5,400

Godox XT-16 Wireless Power-Control Flash Trigger 2.4G (Transmitter)

Ksh4,100

Godox XProS TTL Wireless Flash Trigger for Sony Cameras

Ksh8,000

Godox XProN TTL Wireless Flash Trigger for Nikon Cameras

Ksh8,000

Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras

Ksh9,400

Godox XProC TTL Wireless Flash Trigger for Canon Cameras

Ksh8,000

Godox XPro II TTL Wireless Flash Trigger for Sony Cameras

Ksh10,800

Godox XPro II TTL Wireless Flash Trigger for Nikon Cameras

Ksh10,800

Godox XPro II TTL Wireless Flash Trigger for Canon Cameras

Ksh10,800